Command Center Rx - Kyocera TASKalfa 306ci Operation Manual

Installing and Setting up the Machine > Command Center RX

Command Center RX

If the machine is connected to the network, you can configure various settings using Command Center RX.
This section explains how to access Command Center RX, and how to change security settings and the host name.
Command Center RX User Guide
NOTE
To fully access the features of the Command Center RX pages, enter the User Name and Password and click [Login].
Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: Admin
Settings that the administrator and general users can configure in Command Center RX are as follows.
Setting
The machine's structure can be checked.
Device
Information
Displays all device information, including print and scan jobs, storing jobs,
Job Status
scheduled jobs, and job log history.
Add or delete document boxes, or delete documents within a document box.
Document Box
Create, edit, or delete addresses and address groups.
Address Book
Configure the advanced settings of the machine.
Device Settings
Configure the advanced function settings.
Function Settings
Configure the network advanced settings.
Network Settings
Configure the security advanced settings.
Security Settings
Configure the advanced management settings.
Management
Settings
*1 The logged in user may not be able to configure some settings, depending on the permissions of the user.
NOTE
Here, information on the FAX settings has been omitted.
FAX System 11 Operation Guide
Description
2-46
Administ- General
rator User
*1
*1
-
-
-
-
-