Kyocera TASKalfa 306ci Operation Manual page 361

Troubleshooting > Troubleshooting
Symptom
2 or more sheets are
overlaps when ejected.
(multi feed)
Printouts are wrinkled.
Printouts are curled.
Cannot print.
Cannot print with USB
memory.
USB memory not
recognized.
While "Auto-IP" is set to
[On], the IP address is not
assigned automatically.
Checkpoints
―
Is the paper loaded correctly?
―
Is the paper damp?
―
Is the paper damp?
Is the machine plugged in?
Is the machine powered on?
Are the USB cable and network cable
connected?
Is the print job paused?
Is the USB host blocked?
―
Is a value other than "0.0.0.0" entered
for the IP address of TCP/IP(v4)?
Corrective Actions
Load the paper correctly.
Load the paper correctly.
Turn the orientation 180 degrees around
in which the paper is positioned.
Replace the paper with new paper.
Turn the orientation 180 degrees around
in which the paper is positioned.
Replace the paper with new paper.
Plug the power cord into an AC outlet.
Turn on the power switch.
Connect the correct USB cable and
network cable securely.
Resume printing.
Select [Unblock] in the USB host
settings.
Check that the USB memory is securely
plugged into the machine.
Enter "0.0.0.0" for the IP address of
TCP/IP(v4).
10-14
Reference
Page
page 3-2
page 3-4
page 3-2
page 3-4
page 3-2
page 3-4
―
page 2-9
page 2-7
page 7-10
page 8-37
―
page 2-24