Changing Security Settings - Kyocera TASKalfa 306ci Operation Manual

Installing and Setting up the Machine > Command Center RX

Changing Security Settings

This section explains how to change the security settings.
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[Device Information] in the home screen > [Identification/Network]
3
Log in with administrator privileges.
The factory default setting for the default user with administrator privileges is shown below. (Upper
case and lower case letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: Admin
4
Click [Security Settings].
2-48