Responding To Messages - Kyocera TASKalfa 306ci Operation Manual

Troubleshooting > Troubleshooting

Responding to Messages

If the touch panel or the computer displays any of these messages, follow the corresponding procedure.
NOTE
When contacting us, the serial number will be necessary. To check the serial number, refer to the following:
Display for Device Information (page 2-16)
Loading Paper in the Multi Purpose Tray (page 5-5)
Message
A
Acceptable staple count
exceeded.
Activation error.
Add the following paper in
cassette #.
Add the following paper in
the multi purpose tray.
Adjusting...
B
Box is not found.
*1
Box limit exceeded.
C
Calibrating...
Checkpoints
Is the acceptable staple count
exceeded?
―
Is the indicated cassette out of paper?
Does the selected paper size matches
the paper size loaded in the specified
paper source?
Is the indicated cassette out of paper?
―
―
Is [End] displayed on the screen?
—
Corrective Actions
Select [Continue] to print without
stapling. Select [Cancel] to cancel the
job.
Turn the power switch off and on. If the
error exists, contact administrator.
Load paper.
Select [Paper Selection] to select the
other paper source. Select [Continue]
to print on the paper in the currently
selected paper source.
Select [Continue] to continue printing.
Select [Cancel] to cancel the job.
Load paper.
Select [Paper Selection] to select the
other paper source. Select [Continue]
to print on the paper in the currently
selected paper source.
The machine is under the adjustment to
maintain its quality. Please wait.
The specified box cannot be found. Job
is canceled. Select [End].
The specified box is full, and no further
storage is available; Job is canceled.
Select [End]. Try to perform the job
again after printing or deleting data from
the box.
The machine is under the adjustment to
maintain its quality. Please wait.
10-20
Reference
Page
—
page 2-9
page 3-2
—
page 3-9
—
—
—
page 10-37