Priority Override; Quiet Mode; Skip Blank Page - Kyocera TASKalfa 306ci Operation Manual

Using Various Functions > Functions

Priority Override

Print from Print from
Copy
Box USB
Suspends the current job and gives a new job top priority.
The suspended job resumes after the other job is finished.
(Value: [Off] / [On])
NOTE
• This function is not available if current job was an override.
• Priority override may not be available depending on the status of the current print job and memory usage.

Quiet Mode

Print from Print from
Copy
Box USB
Lower print and scan speed for quiet processing.
Select this mode when the running noise is uncomfortable.
It is possible to set the use of Quiet Mode for each function, such as copying and sending.
(Value: [Off] / [On])
NOTE
• The processing speed will be slower than normal when in Quiet Mode.
• This cannot be used when [Prohibit] is set for "Specify for Each Job".
Specify for Each Job (page 8-42)

Skip Blank Page

Scan to
Copy
Send
USB
When there are blank pages in a scanned document, this function skips the blank pages and prints only pages that are
not blank.
When set to [High], the level at which blank paper is recognized is higher.
The machine detects blank pages, saving unnecessary printing without the need to check for blank pages in the
document.
Select [Low], [Middle] or [High] in [On].
NOTE
The originals with punched holes or originals printed on a colored substrate may not be recognized as blank pages.
Scan to
Send
USB
6-30