System/Network - Kyocera TASKalfa 306ci Operation Manual

Setup and Registration (System Menu) > System Menu

System/Network

Configures machine system settings.
Network
[System Menu/Counter] key > [System/Network] > [Network]
Configures network settings.
Host Name
Item
Host Name
TCP/IP Settings
Item
TCP/IP
IPv4 Settings
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Check the host name of the machine. Host name can be changed from Command Center RX.
Changing Device Information (page 2-50)
Set up TCP/IP to connect to the Windows network.
Value: Off, On
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to
[On].
Select whether or not to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be entered.
8-29
Description
Description