Kyocera TASKalfa 306ci Operation Manual page 278

Setup and Registration (System Menu) > System Menu
Measurement
[System Menu/Counter] key > [Common Settings] > [Measurement]
Item
Measurement
Low Toner Alert Level
[System Menu/Counter] key > [Common Settings] > [Low Toner Alert Level]
Item
Low Toner Alert
Keyboard Layout
[System Menu/Counter] key > [Common Settings] > [Keyboard Layout]
Item
Keyboard Layout
USB Keyboard Type
[System Menu/Counter] key > [Common Settings] > [USB Keyboard Type]
Item
USB Keyboard Type
Offset Documents by Job
[System Menu/Counter] key > [Common Settings] > [Offset Documents by Job]
Item
Offset Documents by Job
Select inch or metric for the unit for paper dimensions.
Value: mm, inch
Set the amount of remaining toner to notify the administrator when to order a toner when the
toner is running low.
This notification is used for event report, Status Monitor, SNMP Trap.
Value: Off, On
NOTE
If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to 100% (in
1% increments).
Change the layout of the touch panel keyboard used to enter characters.
Value: QWERTY, QWERTZ, AZERTY
Select the type of USB keyboard that you want to use.
Value: US-English, US-English with Euro, French, German
Select whether to offset documents by Job.
Value: Off, On
NOTE
This function is displayed when an optional 1,000-Sheet Finisher is installed.
8-20
Description
Description
Description
Description
Description