Kyocera TASKalfa 306ci Operation Manual page 372

Troubleshooting > Troubleshooting
Message
S
Scanner memory is full.
*1
Send Error.
SSD error.
Staple is empty.
Staple jam.
Checkpoints
*1
—
—
—
Has any of the document finisher run
out of staples?
—
Corrective Actions
Scanning cannot be performed due to
insufficient memory of scanner. Only
one copy of the scanned pages is
available. Select [Continue] to print,
send or store the scanned pages. Select
[Cancel] to cancel the printing job.
The machine may reproduce the same
originals by arranging the following
settings:
• Reduce the number of originals to be
scanned at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
• Select [Copy Priority] of Optional
Memory in System Menu.
NOTE
Before changing the Optional Memory
setting, contact your administrator.
An error has occurred during
transmission. The job is canceled.
Select [End].
Refer to Responding to Send Error
the error code and corrective actions.
An error has occurred on SSD. Job is
canceled. Select [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded. Turn
the power OFF/ON. If the error still
occurs, divide the file into smaller files. If
the error occurs after the file is divided,
the specified file may be damaged.
Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data or
delete unneeded data.
If the staples are depleted, the machine
will stop and the location of staple
depletion will be indicated on the
screen. Leave the machine on and
follow the instruction to replace the
staple case.
Select [Continue] to print without
stapling. Select [Cancel] to cancel the
job.
If a staple jam occurs, the machine will
stop and the location of the jam will be
indicated on the screen. Leave the
machine on and follow the instruction to
remove the jammed staple.
10-25
Reference
Page
—
page 10-27
for
—
—
—