Volume Menu - Yamaha RX-V1800 Owner's Manual

Customizing this unit (MANUAL SETUP)
Adaptive DSP level 1::H::q::~PT
I i')E DSP I....EI.)EL
Use this feature to make fine adjustments of the DSP
effect level (see page 68) automatically in conjunction
with the volume level.
2 VOLUME MENU
Use this menu to manually adjust the various volume
settings.
AUTO
OFF
Note
Adjusts the DSP effect level in conjunction with
the volume level.
Does not adjust the DSP effect level
automatically.
Even if you set "ADAPTIYE DSP LEVEL" to "AUTO", this unit
does not change but the fine-tunes the specified value of "DSP
LEYEL" (see page 68).
Muting type
"I'IUT I I"~G T'yiPI::::
Use this feature to adjust how much the mute function
reduces the output volume (see page 44).
Reduces the current volume by 20 dB.
Mutes all the audio output.
FULL
-20dB
Adaptive dynamic range control
Use this feature to adjust the dynamic range in
conjunction with the volume level. This feature is useful
when you are listening at lower volumes or at night. When
"ADAPTIVE DRC" is set to "AUTO", this unit controls
the dynamic range as follows:
- If the VOLUME setting is low:
the dynamic range is narrow
- If the VOLUME setting is high:
the dynamic range is wide
A11TO
(H+
Input level
VOLUME: low
AUTO
()H·
Input level
VOLUME: high
Maximum volume
rl' I I::I>:: 1.)01....
n
Use this feature to set the maximum volume level in the
main zone. This feature is useful to avoid the unexpected
loud sound by mistake. For example, the original volume
range is -80.0 dB to +16.5 dB. However, when "MAX
VOL." is set to -5.0 dB, the volume range becomes
-80.0 dB to -5.0 dB.
Control range: -30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
AUTO Adjusts the dynamic range automatically.
Notes
Note
• You can also adjust the dynamic range of the bitstream signal
sources by using "DYNAMIC RANGE" in "SOUND MENU"
(see page R6).
• This function is also useful for listening with your headphones.
OFF
Does not adjust the dynamic range
automatically.
• When this unit is in the auto setup procedure, the volume level
is automatically set to 0 dB regardless of the current "MAX
YOL." setting.
• The "MAX YOL." setting takes priority over the initial volume
setting. For example, if "INI.YOL." is set to -20.0 dB and
"MAX YOL." is set to -30.0 dB, the volume level is
automatically set to -30.0 dB when you turn on the power of
this unit next time.
• Use "MAX YOL." in "ZONE SET" to set the initial volume
level in Zone 2 or Zone 3.
The adaptive dynamic range control feature does not function
when this unit is in the Pure Direct mode (see page 52).
Initial volume
II···iI·r
II
1.)01....11
Use this feature to set the volume level of the main zone
when the power of this unit is turned on.
Choices: OFF, MUTE, -80.0 dB to +16.5 dB
Control step: 0.5 dB
Note
The "MAX YOL." setting takes priority over the initial volume
setting.
84
En
Customizing this unit (MANUAL SETUP)
Adaptive DSP level 1::H::q::~PT
I i')E DSP I....EI.)EL
Use this feature to make fine adjustments of the DSP
effect level (see page 68) automatically in conjunction
with the volume level.
2 VOLUME MENU
Use this menu to manually adjust the various volume
settings.
AUTO
OFF
Note
Adjusts the DSP effect level in conjunction with
the volume level.
Does not adjust the DSP effect level
automatically.
Even if you set "ADAPTIYE DSP LEVEL" to "AUTO", this unit
does not change but the fine-tunes the specified value of "DSP
LEYEL" (see page 68).
Muting type
"I'IUT I I"~G T'yiPI::::
Use this feature to adjust how much the mute function
reduces the output volume (see page 44).
Reduces the current volume by 20 dB.
Mutes all the audio output.
FULL
-20dB
Adaptive dynamic range control
Use this feature to adjust the dynamic range in
conjunction with the volume level. This feature is useful
when you are listening at lower volumes or at night. When
"ADAPTIVE DRC" is set to "AUTO", this unit controls
the dynamic range as follows:
- If the VOLUME setting is low:
the dynamic range is narrow
- If the VOLUME setting is high:
the dynamic range is wide
A11TO
(H+
Input level
VOLUME: low
AUTO
()H·
Input level
VOLUME: high
Maximum volume
rl' I I::I>:: 1.)01....
n
Use this feature to set the maximum volume level in the
main zone. This feature is useful to avoid the unexpected
loud sound by mistake. For example, the original volume
range is -80.0 dB to +16.5 dB. However, when "MAX
VOL." is set to -5.0 dB, the volume range becomes
-80.0 dB to -5.0 dB.
Control range: -30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
AUTO Adjusts the dynamic range automatically.
Notes
Note
• You can also adjust the dynamic range of the bitstream signal
sources by using "DYNAMIC RANGE" in "SOUND MENU"
(see page R6).
• This function is also useful for listening with your headphones.
OFF
Does not adjust the dynamic range
automatically.
• When this unit is in the auto setup procedure, the volume level
is automatically set to 0 dB regardless of the current "MAX
YOL." setting.
• The "MAX YOL." setting takes priority over the initial volume
setting. For example, if "INI.YOL." is set to -20.0 dB and
"MAX YOL." is set to -30.0 dB, the volume level is
automatically set to -30.0 dB when you turn on the power of
this unit next time.
• Use "MAX YOL." in "ZONE SET" to set the initial volume
level in Zone 2 or Zone 3.
The adaptive dynamic range control feature does not function
when this unit is in the Pure Direct mode (see page 52).
Initial volume
II···iI·r
II
1.)01....11
Use this feature to set the volume level of the main zone
when the power of this unit is turned on.
Choices: OFF, MUTE, -80.0 dB to +16.5 dB
Control step: 0.5 dB
Note
The "MAX YOL." setting takes priority over the initial volume
setting.
84
En