Yamaha RX-V1800 Owner's Manual page 87

• Speaker distance C) 5P DI
5THt'~CE
Use this feature to manually adjust the distance of each
speaker and the delay appliedl to the respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds will arrive at the listening position at the same
time.
.,;..
Unit for the speaker
dist~lnce
adjustment
UI"~ I T
Initial setting:
[U.S.A. and Canada models]: feet
(ft)
[Other models]: meters (m)
Customizing this unit (MANUAL SETUP)
,I,
~(j)-:'
If your subwoofer can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and
set the crossover frequency to the maximum.
• The available speaker channels differ depending on the setting
of the speakers.
• Instead of "SB L" and "S8 R", "SUR.B" is displayed if
"SUR.B L/R SP" is set to either "SMLx 1" or "LRGx 1" (see
page 81).
• Test tone
D) TEST
TOt'~E
Turns the test tone output on or off for the "SPEAKER
SET", "SPEAKER LEVEL", and "SP DISTANCE"
settings.
[»
'lE::::T' TUt·,IE
meters (m)
Adjusts speaker distances in meters.
Speaker distances
Control range: 0.30 to 24.00
In
(1.0 to 80.0
ft)
Control step: 0.10 m (0.5 ft)
Initial setting:
FRONT L/FRONT RlSWFRlPRNS L/
PRNS R: 3.00 m (10.0
ft)
CENTER: 2.60 m (8.5 ft)
SUR. L/SUR. RlSB L/SB R: 2.40 m (8.0 ft)
,I,
~(j)-:'
If you use a handheld sound pressure level meter, hold at arm's
length and point upwards so that the meter is in the listening
position. With the meter set to the 70 dB scale and to C SLOW,
calibrate each speaker to 75 dB.
feet
(ft)
Adjusts speaker distances in feet.
OFF
ON
This unit does not output the test tone for the
"SPEAKER SET", "SPEAKER LEVEL", and
"SP DISTANCE" settings.
This unit outputs the test tone for the
"SPEAKER SET". "SPEAKER LEVEL", and
"SP DISTANCE" settings.
FRONTL
Front left speaker
FRONTR
Front right speaker
CENTER Center speaker
SUR. L Surround left speaker
SUR.R
Surround right speaker
SB L Surround back left speaker
SB R Surround back right speaker
SWFR
Subwoofer
PRNS L Presence left speaker
PRNSR
Presence right speaker
This function is automatically turned off if you exit from "BASIC
MENU".
83
En
• Speaker distance C) 5P DI
5THt'~CE
Use this feature to manually adjust the distance of each
speaker and the delay appliedl to the respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds will arrive at the listening position at the same
time.
.,;..
Unit for the speaker
dist~lnce
adjustment
UI"~ I T
Initial setting:
[U.S.A. and Canada models]: feet
(ft)
[Other models]: meters (m)
Customizing this unit (MANUAL SETUP)
,I,
~(j)-:'
If your subwoofer can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and
set the crossover frequency to the maximum.
• The available speaker channels differ depending on the setting
of the speakers.
• Instead of "SB L" and "S8 R", "SUR.B" is displayed if
"SUR.B L/R SP" is set to either "SMLx 1" or "LRGx 1" (see
page 81).
• Test tone
D) TEST
TOt'~E
Turns the test tone output on or off for the "SPEAKER
SET", "SPEAKER LEVEL", and "SP DISTANCE"
settings.
[»
'lE::::T' TUt·,IE
meters (m)
Adjusts speaker distances in meters.
Speaker distances
Control range: 0.30 to 24.00
In
(1.0 to 80.0
ft)
Control step: 0.10 m (0.5 ft)
Initial setting:
FRONT L/FRONT RlSWFRlPRNS L/
PRNS R: 3.00 m (10.0
ft)
CENTER: 2.60 m (8.5 ft)
SUR. L/SUR. RlSB L/SB R: 2.40 m (8.0 ft)
,I,
~(j)-:'
If you use a handheld sound pressure level meter, hold at arm's
length and point upwards so that the meter is in the listening
position. With the meter set to the 70 dB scale and to C SLOW,
calibrate each speaker to 75 dB.
feet
(ft)
Adjusts speaker distances in feet.
OFF
ON
This unit does not output the test tone for the
"SPEAKER SET", "SPEAKER LEVEL", and
"SP DISTANCE" settings.
This unit outputs the test tone for the
"SPEAKER SET". "SPEAKER LEVEL", and
"SP DISTANCE" settings.
FRONTL
Front left speaker
FRONTR
Front right speaker
CENTER Center speaker
SUR. L Surround left speaker
SUR.R
Surround right speaker
SB L Surround back left speaker
SB R Surround back right speaker
SWFR
Subwoofer
PRNS L Presence left speaker
PRNSR
Presence right speaker
This function is automatically turned off if you exit from "BASIC
MENU".
83
En