Setting The Xmtm Satellite Radio; Preset Channels - Yamaha RX-V1800 Owner's Manual

™ •
io tunin
Before performing the following operations, set the operation
mode selector on the remote control to
@SOURCE
and then
press
CDXM.
Setting the XMTM Satellite Radio
preset channels
You can use this feature to store up to 40 XM Satellite
Radio channels (A 1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in "'Preset Search mode"
on page 60.
1
Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
l
I::
0 : : : 1 ·
:~:;
::I i
>::
": ' 1
!...!
i
~~....
·u· .
.-~.'"'''''-
-'(,.- ........
Currently: selected channel number
3
Press ®CATEGORY (or @A-E/CAT.
<J
I
[»
repeatedly to select a preset channel group
(A to E) while the MEMORY indicator is
flashing.
The preset channel group letter appears in the front
panel display.
TJ
cLu-r-re-n-t-IY-S-e-le-c-te-d-+'-pr-e-s-et-c-h-a-n-n-e-I
g -r-o-u-p----F---:la~hes
4
Press @PRESETITUNING/CH
<J /
[>
(or
@PRESET/CH
£::./ \/)
repeatedly to select a
preset channel number (1 to 8) while the
MEMORY indicator is flashing.
The preset channel number appears in the front panel
display.
2
Press Q)MEMORY (or @XM MEMORY).
The MEMORY indicator flashes in the front panel
display for approximately 10 seconds.
Currently selected preset channel number
Flashes
MEMORy·····
Flashes
Note
You must proceed to and carry out steps 3 through::; while
the MEMORY indicator is flashing in the front panel
display.
62
En
5
Press Q)MEMORY (or @XM MEMORY) to
set the selected XM Satellite Radio channel
as a preset channel while the MEMORY
indicator is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
off in the front panel display.
Colon <:)
Note
Once you set a new preset channel. the one previously stored in
the same preset channel group and number is cleared.
™ •
io tunin
Before performing the following operations, set the operation
mode selector on the remote control to
@SOURCE
and then
press
CDXM.
Setting the XMTM Satellite Radio
preset channels
You can use this feature to store up to 40 XM Satellite
Radio channels (A 1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in "'Preset Search mode"
on page 60.
1
Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
l
I::
0 : : : 1 ·
:~:;
::I i
>::
": ' 1
!...!
i
~~....
·u· .
.-~.'"'''''-
-'(,.- ........
Currently: selected channel number
3
Press ®CATEGORY (or @A-E/CAT.
<J
I
[»
repeatedly to select a preset channel group
(A to E) while the MEMORY indicator is
flashing.
The preset channel group letter appears in the front
panel display.
TJ
cLu-r-re-n-t-IY-S-e-le-c-te-d-+'-pr-e-s-et-c-h-a-n-n-e-I
g -r-o-u-p----F---:la~hes
4
Press @PRESETITUNING/CH
<J /
[>
(or
@PRESET/CH
£::./ \/)
repeatedly to select a
preset channel number (1 to 8) while the
MEMORY indicator is flashing.
The preset channel number appears in the front panel
display.
2
Press Q)MEMORY (or @XM MEMORY).
The MEMORY indicator flashes in the front panel
display for approximately 10 seconds.
Currently selected preset channel number
Flashes
MEMORy·····
Flashes
Note
You must proceed to and carry out steps 3 through::; while
the MEMORY indicator is flashing in the front panel
display.
62
En
5
Press Q)MEMORY (or @XM MEMORY) to
set the selected XM Satellite Radio channel
as a preset channel while the MEMORY
indicator is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
off in the front panel display.
Colon <:)
Note
Once you set a new preset channel. the one previously stored in
the same preset channel group and number is cleared.