Yamaha RX-V1800 Owner's Manual page 94

Customizing this unit (MANUAL SETUP)
XM Radio antenna
~~t'~TE}U'~H LEI')EL.
(U.S.A. and Canada models only)
Use this feature to check the current reception level of the
XM Satellite Radio signals (see page 58). For the best
reception, adjust the orientation of the antenna of
connected Home Dock so that a value of 60% or more is
displayed here.
Display status: NONE, 0 to 100%
Input channels
I t'~PUT CH
Use this setting to select the number of channels input
from an external decoder (see page 30).
Choices: 6CH, 8CH
Nots
"NONE" is displayed if the Home Dock is not connected to this
unit. In this case, check the antenna connections (see page 58).
If the connected component outputs discrete
6-channel audio signals.
Select "6CH".
If the connected component outputs discrete
8-channel audio signals.
Select "8CH". Also set "FRONT" (see below) to the
analog audio jacks at which the front left and right
channel signals output from the connected component
are input.
If "AMP" is set to "[SPI]", "[SP2]" or "BOTH" (see page 94), no
sound is output from the surround back speakers even if you
select "8CH". In this case, select "6CH" and set the output setting
of the external component to 6 channels.
Charges the battery of the stationed iPod when
this unit is turned on and in the standby mode.
AUTO
Charge on standby
5THt'~DB"'"
CHHPI3E
Use this feature to select whether this unit charges the
battery of the stationed iPod or not when this unit is in the
standby mode (see page 64).
Multi-channel input BGV
BI3I.)
Use this feature to select the video source played in the
background of the sources input at the MULTI CH INPUT
jacks.
OFF
Charges the battery of the stationed iPod only
when this unit is turned on.
Front left and right channels input jack
Fk~Ot'~T
If you selected "8CH" in "INPUT CH", you can select the
analog audio jacks at which the front left and right channel
signals output from the connected external decoder is
input.
Choices: CD, CD-R, MD/TAPE, BD/HD DVD, DVD,
DTV/CBL, VCR, DVR, V-AUX
C) '"'1UL TI CH
I t-WUT
PEt"~HI"'1E
I')OL. TPlt'1·····
B(JI.) •••••••••••
It"WUT CH· " •••••
~ F~JNT·····BD/HD
LAST Automatically selects the last selected video
source as the background video source.
"FRONT" parameter appears only when you set "INPUT CH" to
"8CH".
BD/HD DVD,
DTV/CBL,
DVD, DVR,
VCR, V-AUX
Selects the corresponding input source as the
background video source.
OFF
Does not play the video source in the
background.
90
En
Customizing this unit (MANUAL SETUP)
XM Radio antenna
~~t'~TE}U'~H LEI')EL.
(U.S.A. and Canada models only)
Use this feature to check the current reception level of the
XM Satellite Radio signals (see page 58). For the best
reception, adjust the orientation of the antenna of
connected Home Dock so that a value of 60% or more is
displayed here.
Display status: NONE, 0 to 100%
Input channels
I t'~PUT CH
Use this setting to select the number of channels input
from an external decoder (see page 30).
Choices: 6CH, 8CH
Nots
"NONE" is displayed if the Home Dock is not connected to this
unit. In this case, check the antenna connections (see page 58).
If the connected component outputs discrete
6-channel audio signals.
Select "6CH".
If the connected component outputs discrete
8-channel audio signals.
Select "8CH". Also set "FRONT" (see below) to the
analog audio jacks at which the front left and right
channel signals output from the connected component
are input.
If "AMP" is set to "[SPI]", "[SP2]" or "BOTH" (see page 94), no
sound is output from the surround back speakers even if you
select "8CH". In this case, select "6CH" and set the output setting
of the external component to 6 channels.
Charges the battery of the stationed iPod when
this unit is turned on and in the standby mode.
AUTO
Charge on standby
5THt'~DB"'"
CHHPI3E
Use this feature to select whether this unit charges the
battery of the stationed iPod or not when this unit is in the
standby mode (see page 64).
Multi-channel input BGV
BI3I.)
Use this feature to select the video source played in the
background of the sources input at the MULTI CH INPUT
jacks.
OFF
Charges the battery of the stationed iPod only
when this unit is turned on.
Front left and right channels input jack
Fk~Ot'~T
If you selected "8CH" in "INPUT CH", you can select the
analog audio jacks at which the front left and right channel
signals output from the connected external decoder is
input.
Choices: CD, CD-R, MD/TAPE, BD/HD DVD, DVD,
DTV/CBL, VCR, DVR, V-AUX
C) '"'1UL TI CH
I t-WUT
PEt"~HI"'1E
I')OL. TPlt'1·····
B(JI.) •••••••••••
It"WUT CH· " •••••
~ F~JNT·····BD/HD
LAST Automatically selects the last selected video
source as the background video source.
"FRONT" parameter appears only when you set "INPUT CH" to
"8CH".
BD/HD DVD,
DTV/CBL,
DVD, DVR,
VCR, V-AUX
Selects the corresponding input source as the
background video source.
OFF
Does not play the video source in the
background.
90
En