Yamaha RX-V1800 Owner's Manual page 43

6
Press @<J I
[>
repeatedly to toggle between
the setup result displays.
Results of
tlhe
spE!aker
connection and "\tiring
Results of tlhe speaker distance
from the listening position
Results of
tlhe
spE!aker detection
and size
Results of the parametric
equalizer of each speaker
Results of the
spE~aker
output
level
~\cj{~
• Press
@
6. / \I
to toggle between the parameters in the
result.
• If you are not satisfied with the results or want to lTIanually
adjust each parameter. run "MANUAL SETUP" (see
page 75).
Notes
• If you change speakers. speaker positions. or the layout of
your listening environment. run ·'AUTO SETUP" again to
recalibrate your systelTI.
• The distances displayed in the "DISTANCE" results may
be longer than the actual distance depending on the
characteristics of your subwoofer or external amplifiers if
you connect them.
• In the "EQUALIZING" results. different values may be set
for the sanle band to provide finer adjustments.
7
Press @ENTER to rleturnl to the top result
display.
Optimizing the speaker setting for your listening room
8
Press @<J I
[>
to select "SET" or "CANCEL".
."·.ii"j"I··'.I····j"··· .. j.. iii···1
1"'11..,111...'
.:::' 1 :::.
..:....:11.:::....:... ..
'1'.. _
..
~.
Choices: SET, CANCEL
• Select "SET" to confirm the ""AUTO SETUP"
results.
• Select "'CANCEL" to cancel the ""AUTO SETUP"
results.
9
Press @ENTER to confirm your selection.
The top ""SET MENU" display appears in the OSD.
10
Press @SET MENU to exit from "SET
MENU".
Notes
• After you have completed the automatic setup procedure. be
sure to disconnect the optimizer microphone.
• The optimizer microphone is sensitive to heat. Keep it away
from direct sunlight and do not place it on top of this unit.
SYSTEM MEMORY feature
You can save multiple result of the automatic setup by using
the SYSTEM MEMORY feature. See page 96 for details.
..~.
39
En
6
Press @<J I
[>
repeatedly to toggle between
the setup result displays.
Results of
tlhe
spE!aker
connection and "\tiring
Results of tlhe speaker distance
from the listening position
Results of
tlhe
spE!aker detection
and size
Results of the parametric
equalizer of each speaker
Results of the
spE~aker
output
level
~\cj{~
• Press
@
6. / \I
to toggle between the parameters in the
result.
• If you are not satisfied with the results or want to lTIanually
adjust each parameter. run "MANUAL SETUP" (see
page 75).
Notes
• If you change speakers. speaker positions. or the layout of
your listening environment. run ·'AUTO SETUP" again to
recalibrate your systelTI.
• The distances displayed in the "DISTANCE" results may
be longer than the actual distance depending on the
characteristics of your subwoofer or external amplifiers if
you connect them.
• In the "EQUALIZING" results. different values may be set
for the sanle band to provide finer adjustments.
7
Press @ENTER to rleturnl to the top result
display.
Optimizing the speaker setting for your listening room
8
Press @<J I
[>
to select "SET" or "CANCEL".
."·.ii"j"I··'.I····j"··· .. j.. iii···1
1"'11..,111...'
.:::' 1 :::.
..:....:11.:::....:... ..
'1'.. _
..
~.
Choices: SET, CANCEL
• Select "SET" to confirm the ""AUTO SETUP"
results.
• Select "'CANCEL" to cancel the ""AUTO SETUP"
results.
9
Press @ENTER to confirm your selection.
The top ""SET MENU" display appears in the OSD.
10
Press @SET MENU to exit from "SET
MENU".
Notes
• After you have completed the automatic setup procedure. be
sure to disconnect the optimizer microphone.
• The optimizer microphone is sensitive to heat. Keep it away
from direct sunlight and do not place it on top of this unit.
SYSTEM MEMORY feature
You can save multiple result of the automatic setup by using
the SYSTEM MEMORY feature. See page 96 for details.
..~.
39
En