Volume Menu - Yamaha RX-V863 Owner's Manual

Customizing thIs Unit (MANUAL SETUP)
2 IJOLUME MEflU
Use this menu to manually adjust the various volume
settings.
Does not adjust the DSP effect level
automatically.
Adjusts the DSP effect level in conjunction with
the volume level.
OFF
AUTO
NoteJ
Adaptive DSP level
~D~PT I I,)E DSP LEI..JEL
Use this feature to make fine adjustments of the DSP
effect level (see page 75) automatically in conjunction
with the volume level.
2
VOL
UME.:
N/ENU··
~
RDRPTIIJE DRC····OFF
RDRPTI IJE DSP
LEIJEL····OFF
t1UTE TYPE·· •• FULL
MRX IJOL.
····+16.5dB
INIT. IJOL.······ OFF
1.)/ IT): Up/Down
I")/[~):
Select.
Even if you set "ADAPTIVE DSP LEVEL" to "AUTO", this unit
does not change but the fine-tunes the specified value of "DSP
LEVEL" (see page 75).
Muting type
t'lUTE T'/PE
Use this feature to adjust how much the mute function
reduces the output volume (see page 45).
Adaptive dynamic range control
~D~PT
I
I')E
DRC
Use this feature to adjust the dynamic range in
conjunction with the volume level. This feature is useful
when you are listening at lower volumes or at night. When
"ADAPTIVE DRC" is set to "AUTO", this unit controls
the dynamic range as follows:
- If the VOLUME setting is low:
the dynamic range is narrow
If the VOLUME setting is high:
the dynamic range is wide
FULL
-20<1B
Mutes all the audio output.
Reduces the current volume by 20 dB.
A~O
] A/TO
8.
OFF
8
OFF
Input level
VOLUME: low
Input level
VOLUME: high
Maximum volume
t'l!=l::'~ I')OL.
Use this feature to set the maximum volume level in the
main zone. This feature is useful to avoid the unexpected
loud sound by mistake. For example, the original volume
range is -80.0 dB to + 16.5 dB. However, when "MAX
VOL." is set to -5.0 dB, the volume range becomes
-80.0 dB to -5.0 dB.
Control range: -30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
The adaptive dynamic range control feature does not function
when this unit is in the Pure Direct mode (see page 52).
'"
~<il"
• You can also adjust the dynamic range of the bitstream signal
sources by using "DYNAMIC RANGE" in "SOUND MENU"
(see page 93).
• This function is also useful for listening with your headphones.
AUTO
OFF
Adjusts the dynamic range automatically.
Does not adjust the dynamic range automatically.
• When this unit is in the auto setup procedure, the volume level
is automatically set to 0 dB regardless of the current "MAX
VOL." setting.
• The "MAX VOL." setting takes priority over the initial volume
setting. For example, if "INI. VOL." is set to -20.0 dB and
"MAX VOL." is set to -30.0 dB, the volume level is
automatically set to -30.0 dB when you tum on the power of
this unit next time.
• Use "MAX VOL." in "ZONE SET" to set the initial volume
level in Zone 2.
Initial volume
I t·~ IT.
I')OL.
Use this feature to set the volume level of the main zone
when the power of this unit is turned on.
Choices: OFF, MUTE, -80.0 dB to +16.5 dB
Control step: 0.5 dB
The "MAX VOL." setting takes priority over the initial volume
setting.
•
91
En