Yamaha RX-V1800 Owner's Manual page 64

XMTM Satellite Radio tuning
Beforc performing the following operations, sct the operation
mode selector on the rcmote control to
@SOURCE
and then
prcss
CDXM.
• All Channel Search mode
1
Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select "ALL CH
SEARCH".
2
Press ®CATEGORY (or @A-E/CAT.
<J / t»
repeatedly to change the channel category.
3
Press @PRESETITUNING/CH
<J
1t>
(or
@PRESET/CH 1:::./ \/) repeatedly to search
for a channel within all channels.
You can search for a channel quickly hy pressing and
holding
@PRESETfTUNING/CH
<J /
[>
(or
@PRESET/CH
~
/ \/).
• Category Search mode
1
Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select "CAT SEARCH".
2
Press ®CATEGORY (or @A-E/CAT.
<J / t»
repeatedly to change the channel category.
3
Press @PRESETITUNING/CH
<J /
t>
(or
@PRESET/CH 1:::.1 \/) repeatedly to search
for a channel within the selected channel
category.
You can search for a channel quickly hy pressing and
holding
@PRESETfTUNING/CH
<J /
[>
(or
@PRESET/CH
~
/ \/).
60
En
• Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM Satellite Radio channels. For
details, see "Setting the XMTM Satellite Radio preset
channels" on page 62.
The initial factory setting of all preset channels (A I to E8) is
"[001] Preview".
1
Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select "PRESET
SEARCH".
2
Press ®CATEGORY (or @A-E/CAT.
<J / t»
repeatedly to change the preset channel
group (A to E).
3
Press @PRESETITUNING/CH
<J /
t> (or
@PRESET/CH 1:::./ \/) repeatedly to change
the preset channel number (1 to 8).
You can also select the preset channel number directly hy
pressing the numeric buttons (I to 8) on the remote control.
XMTM Satellite Radio tuning
Beforc performing the following operations, sct the operation
mode selector on the rcmote control to
@SOURCE
and then
prcss
CDXM.
• All Channel Search mode
1
Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select "ALL CH
SEARCH".
2
Press ®CATEGORY (or @A-E/CAT.
<J / t»
repeatedly to change the channel category.
3
Press @PRESETITUNING/CH
<J
1t>
(or
@PRESET/CH 1:::./ \/) repeatedly to search
for a channel within all channels.
You can search for a channel quickly hy pressing and
holding
@PRESETfTUNING/CH
<J /
[>
(or
@PRESET/CH
~
/ \/).
• Category Search mode
1
Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select "CAT SEARCH".
2
Press ®CATEGORY (or @A-E/CAT.
<J / t»
repeatedly to change the channel category.
3
Press @PRESETITUNING/CH
<J /
t>
(or
@PRESET/CH 1:::.1 \/) repeatedly to search
for a channel within the selected channel
category.
You can search for a channel quickly hy pressing and
holding
@PRESETfTUNING/CH
<J /
[>
(or
@PRESET/CH
~
/ \/).
60
En
• Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM Satellite Radio channels. For
details, see "Setting the XMTM Satellite Radio preset
channels" on page 62.
The initial factory setting of all preset channels (A I to E8) is
"[001] Preview".
1
Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select "PRESET
SEARCH".
2
Press ®CATEGORY (or @A-E/CAT.
<J / t»
repeatedly to change the preset channel
group (A to E).
3
Press @PRESETITUNING/CH
<J /
t> (or
@PRESET/CH 1:::./ \/) repeatedly to change
the preset channel number (1 to 8).
You can also select the preset channel number directly hy
pressing the numeric buttons (I to 8) on the remote control.