Yamaha RX-V1800 Owner's Manual page 89

Customizing this unit (MANUAL SETUP)
Test tone
'rE:~:::;'T
Use this feature to make adjustments of "'GEQ" while
listening to a test tone. To select "TEST", press
@
~
/
V
repeatedly in the graphic equalizer screen.
Note
The '"GEQ" parameter can be adjusted only when "GEQ" is
selected in "EQ TYPE SELECT".
~\r.r~
Press
@6. /
V
to select a frequency hand and
@<J /
C>
to adjust
the selected frequency band.
Graphic equalizer
(:iI::::C!
Use this feature to match the tonal quality of the center,
surround L/R and surround back L/R, surround back,
presence L/R speakers and the subwoofer with that of the
front L/R speakers. You can adjust 7 frequency bands (63
Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz).
Control range: -6.0 dB to +6.0 dB
Control step: 0.5 dB
Deactivates the equalizing feature.
Uses the parametric equalizer adjusted in
"AUTO SETUP" (see page 37).
Adjusts the built-in 7-frequency band graphic
equalizer so that the tonal quality of the speakers
matches. Press
®
ENTER to display the graphic
equalizer screen.
AUTO PEQ
OFF
GEQ
3 SOtJNDIYIENtJ
Use this feature to adjust the audio parameters.
• Equalizer
r~) E:
c!
I..J 1:::1
I. . . . I;;:::E:i:;:~
Use this feature to select the paralnetric equalizer or the
graphic equalizer.
Equalizer type select EG:! 'TiyiPE: ~::;E::i
. . . .
E:C::·T
Use this feature to select the type of equalizer.
Currently applied parametric equalizer type (see page 40) appears
under'" AUTO PEQ".
Note
OFF
Does not output test tones and output the
currently selected source component.
You can select '"AUTO PEQ" only when you carry out "AUTO
SETUP" in advance (see page 37). In this case. "AUTO PEQ" is
automatically selected as the default setting.
ON
Outputs test tones from the selected speakers.
85
En
Customizing this unit (MANUAL SETUP)
Test tone
'rE:~:::;'T
Use this feature to make adjustments of "'GEQ" while
listening to a test tone. To select "TEST", press
@
~
/
V
repeatedly in the graphic equalizer screen.
Note
The '"GEQ" parameter can be adjusted only when "GEQ" is
selected in "EQ TYPE SELECT".
~\r.r~
Press
@6. /
V
to select a frequency hand and
@<J /
C>
to adjust
the selected frequency band.
Graphic equalizer
(:iI::::C!
Use this feature to match the tonal quality of the center,
surround L/R and surround back L/R, surround back,
presence L/R speakers and the subwoofer with that of the
front L/R speakers. You can adjust 7 frequency bands (63
Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz).
Control range: -6.0 dB to +6.0 dB
Control step: 0.5 dB
Deactivates the equalizing feature.
Uses the parametric equalizer adjusted in
"AUTO SETUP" (see page 37).
Adjusts the built-in 7-frequency band graphic
equalizer so that the tonal quality of the speakers
matches. Press
®
ENTER to display the graphic
equalizer screen.
AUTO PEQ
OFF
GEQ
3 SOtJNDIYIENtJ
Use this feature to adjust the audio parameters.
• Equalizer
r~) E:
c!
I..J 1:::1
I. . . . I;;:::E:i:;:~
Use this feature to select the paralnetric equalizer or the
graphic equalizer.
Equalizer type select EG:! 'TiyiPE: ~::;E::i
. . . .
E:C::·T
Use this feature to select the type of equalizer.
Currently applied parametric equalizer type (see page 40) appears
under'" AUTO PEQ".
Note
OFF
Does not output test tones and output the
currently selected source component.
You can select '"AUTO PEQ" only when you carry out "AUTO
SETUP" in advance (see page 37). In this case. "AUTO PEQ" is
automatically selected as the default setting.
ON
Outputs test tones from the selected speakers.
85
En