Yamaha RX-V1800 Owner's Manual page 29

Connections
Connectingother. • c omponents
• Connecting a Blu-I'ay Disc or HD DVD player
Connect your Blu-ray Disc or HD DVD player to the HDMI IN 1 jack of this unit to perform the features of the Blu-ray
Disc or HD DVD completely.
Make sure that this unit and other
components are unplugged from the
AC wall outlets.
Notes
• When "VIDEO CONV." is set to "OFF' (see page 92), be sure
to make the same type of video connections as those made for
your TV (see page 24). For example, if you connected your TV
to the VIDEO MONITOR OUT jack of this unit. connect your
other components to the VIDEO jacks.
• When "VIDEO CONV." is set to "ON" (see page 92), the
converted video signals are output only at the MONITOR OUT
jacks. When recording a source, you must make the same type
of video connections between each component.
• To nlake a digital connection to a component other than the
default component assigned to each DIGITAL INPUT or
DIGITAL OUTPUT jack, select the corresponding setting for
"OPTICAL OUT", "OPTICAL IN", or "COAXIAL IN" in "I/O
ASSIGNMENT" (see page 89).
• If you connect your DVD player to hath the DIGITAL INPUT
OPTICAL and the DIGITAL INPUT COAXIAL jacks, priority
is given to the signals input at the DIGITAL INPUT COAXIAL
jack.
• The short message displays do not appear when the component
video signals with 480p/576p, 720p, I080i or I080p resolutions
are input.
HOMIout
Blu-ray Disc or
HD DVD player
Opticalollt
Component out
I I
I I
- - - - - "I - - - _ ..
I I
-r'
o
indicatE~s
recommended connections
indicatE~s alternative connections
25
En
Connections
Connectingother. • c omponents
• Connecting a Blu-I'ay Disc or HD DVD player
Connect your Blu-ray Disc or HD DVD player to the HDMI IN 1 jack of this unit to perform the features of the Blu-ray
Disc or HD DVD completely.
Make sure that this unit and other
components are unplugged from the
AC wall outlets.
Notes
• When "VIDEO CONV." is set to "OFF' (see page 92), be sure
to make the same type of video connections as those made for
your TV (see page 24). For example, if you connected your TV
to the VIDEO MONITOR OUT jack of this unit. connect your
other components to the VIDEO jacks.
• When "VIDEO CONV." is set to "ON" (see page 92), the
converted video signals are output only at the MONITOR OUT
jacks. When recording a source, you must make the same type
of video connections between each component.
• To nlake a digital connection to a component other than the
default component assigned to each DIGITAL INPUT or
DIGITAL OUTPUT jack, select the corresponding setting for
"OPTICAL OUT", "OPTICAL IN", or "COAXIAL IN" in "I/O
ASSIGNMENT" (see page 89).
• If you connect your DVD player to hath the DIGITAL INPUT
OPTICAL and the DIGITAL INPUT COAXIAL jacks, priority
is given to the signals input at the DIGITAL INPUT COAXIAL
jack.
• The short message displays do not appear when the component
video signals with 480p/576p, 720p, I080i or I080p resolutions
are input.
HOMIout
Blu-ray Disc or
HD DVD player
Opticalollt
Component out
I I
I I
- - - - - "I - - - _ ..
I I
-r'
o
indicatE~s
recommended connections
indicatE~s alternative connections
25
En