Input Menu - Yamaha RX-V1800 Owner's Manual

Customizing this unit (MANUAL SETUP)
Input menu 4 II'··iPtJ'r 1' : ' 1 E 1", 1
1...1
Note
Some parameters described below may not be availahle for all input sources and some parameters are only availahle for specific input
sources.
Option menu ~5 [IPT' I Cli"~ 1·:·iEt·HJ
r··li"..·i.il···li·.·ii····
rl:.I:::.,O·IIO'oIIOIr.::.
i.)C!L.."
(U.S.A. and Canada
models only)
I t··iF'i.j·T C:i · ··!
,.... j......,..
,:::[::.1
Assigns the input/output jacks according to the component to be used if the initial settings of
this unit do not correspond to your needs.
Changes the name of the input source that appears in the OSO and in the front panel display.
Adjusts the level of the signal input at each jack.
Switches the decoder activation mode. You can designate the reassigned digital input jacks for
DTS signals.
Displays the current reception level of the XM Satellite Radio signals (see page 58).
Selects whether this unit charges the battery of the stationed iPod or not when this unit is in the
~,tandby mode (see page 64).
Selects the video source played back in the hackground of the sources input at the MULTI CH
INPUT jacks.
Selects the numher of channels input from an external decoder.
Selects the analog jacks at which the front channel signals from an external decoder are input
when you set "INPUT CH" to "8CH".
Adjusts the brightness of the front panel display.
89
89
89
89
90
90
90
90
90
91
i'"
L ... ::\!...
·rl:.I.JL..
L..
Adjusts the vertical position of the OSO.
Selects whether this unit displays a gray background in your video
monitor when there is no video signal heing input.
Selects whether this unit displays the short messages on the video
monitor after you perform a certain operation.
Sets the time for which the XM Satellite Radio information or iPod
menu is displayed in the OSO after you perform a certain operation.
Selects the mode to display the information of the XM Satellite Radio
or iPod in the front panel display.
91
91
91
91
92
77
En
Customizing this unit (MANUAL SETUP)
Input menu 4 II'··iPtJ'r 1' : ' 1 E 1", 1
1...1
Note
Some parameters described below may not be availahle for all input sources and some parameters are only availahle for specific input
sources.
Option menu ~5 [IPT' I Cli"~ 1·:·iEt·HJ
r··li"..·i.il···li·.·ii····
rl:.I:::.,O·IIO'oIIOIr.::.
i.)C!L.."
(U.S.A. and Canada
models only)
I t··iF'i.j·T C:i · ··!
,.... j......,..
,:::[::.1
Assigns the input/output jacks according to the component to be used if the initial settings of
this unit do not correspond to your needs.
Changes the name of the input source that appears in the OSO and in the front panel display.
Adjusts the level of the signal input at each jack.
Switches the decoder activation mode. You can designate the reassigned digital input jacks for
DTS signals.
Displays the current reception level of the XM Satellite Radio signals (see page 58).
Selects whether this unit charges the battery of the stationed iPod or not when this unit is in the
~,tandby mode (see page 64).
Selects the video source played back in the hackground of the sources input at the MULTI CH
INPUT jacks.
Selects the numher of channels input from an external decoder.
Selects the analog jacks at which the front channel signals from an external decoder are input
when you set "INPUT CH" to "8CH".
Adjusts the brightness of the front panel display.
89
89
89
89
90
90
90
90
90
91
i'"
L ... ::\!...
·rl:.I.JL..
L..
Adjusts the vertical position of the OSO.
Selects whether this unit displays a gray background in your video
monitor when there is no video signal heing input.
Selects whether this unit displays the short messages on the video
monitor after you perform a certain operation.
Sets the time for which the XM Satellite Radio information or iPod
menu is displayed in the OSO after you perform a certain operation.
Selects the mode to display the information of the XM Satellite Radio
or iPod in the front panel display.
91
91
91
91
92
77
En