Yamaha RX-V1800 Owner's Manual page 28

Connections
Connecting a TV monitor or projector
Connect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S
VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit.
Notes
Make sure that this unit and other
components are unplugged from the
AC wall outlets.
You can select to play back HDMI audio signals on this unit or on
another HDMI component connected to the HDMI OUT jack on
the rear panel of this unit. Use the "SUPPORT AUDIO"
parameter in "SOUND MENU" to select the component to play
back HDMI audio signals (see page 88).
• Some video monitors connected to this unit via a DVI
connection fail to recognize the HDMI audio/video signals
being input if they are in the standby mode. In this case, the
HDMI indicator flashes irregularly.
• Set "VIDEO CONV." in "OPTION MENU" to "ON" (see
page 92) to display the short message displays and sound field
parameter displays.
• The "SET MENU" and sound field parameter displays appear
with the gray background depending on the input video signal
format and the setting of the parameters in "DISPLAY SET"
(see page 91).
• If the connected video monitor is compatible with the automatic
audio and video synchronization feature (automatic lip sync
feature). this unit adjusts the audio and video timing
automatically (see page 87). Connect the video monitor to the
HDMI OUT jack of this unit to use the feature.
...
---- .. --- -
...
1
1
1 1
J
~--
1 _ 1 - - - . . . . . . . . . . . . - - - - '
1 1
1 1
1 1
--C====I : :
1 1
1 1
1 1
1
~
Component video in
HDMI in
TV
(or projector)
indicates recommended connections
indicates alternative connections
24
En
Connections
Connecting a TV monitor or projector
Connect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S
VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit.
Notes
Make sure that this unit and other
components are unplugged from the
AC wall outlets.
You can select to play back HDMI audio signals on this unit or on
another HDMI component connected to the HDMI OUT jack on
the rear panel of this unit. Use the "SUPPORT AUDIO"
parameter in "SOUND MENU" to select the component to play
back HDMI audio signals (see page 88).
• Some video monitors connected to this unit via a DVI
connection fail to recognize the HDMI audio/video signals
being input if they are in the standby mode. In this case, the
HDMI indicator flashes irregularly.
• Set "VIDEO CONV." in "OPTION MENU" to "ON" (see
page 92) to display the short message displays and sound field
parameter displays.
• The "SET MENU" and sound field parameter displays appear
with the gray background depending on the input video signal
format and the setting of the parameters in "DISPLAY SET"
(see page 91).
• If the connected video monitor is compatible with the automatic
audio and video synchronization feature (automatic lip sync
feature). this unit adjusts the audio and video timing
automatically (see page 87). Connect the video monitor to the
HDMI OUT jack of this unit to use the feature.
...
---- .. --- -
...
1
1
1 1
J
~--
1 _ 1 - - - . . . . . . . . . . . . - - - - '
1 1
1 1
1 1
--C====I : :
1 1
1 1
1 1
1
~
Component video in
HDMI in
TV
(or projector)
indicates recommended connections
indicates alternative connections
24
En