Adjusting The Speaker Level - Yamaha RX-V1800 Owner's Manual

Before performing the following operation, set the operation
mode selector on the remote control to
@AMP.
· Using audio features
EiliR~il1lJ"ulti-tJl(Jl1tl,l~f)1.IFCfJS
.j
n
2-channel stereo
Adjusting thespe1aker level
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the
~v1ULTI
CH INPUT jacks.
Note
This operation will override the level adjustlnents made in
"Optimizing the speaker setting for your listening room" (see
page 37) and "SPEAKER LEVEL" (see page 82).
1
Press ®LEVEL on the remote control
repeatedly to select the speaker you want to
adjust.
You can mix down multi -channel sources to 2 channels
and enjoy playback in 2-channel stereo.
Press
~STEREO
on the remote control
repeatedly to select "2ch Stereo".
,I,
~(j)~
• You can use a subwoofer with this program when "LFE/BASS
OUT" is set to "SWFR" or "BOTH" (see page 80).
• You can also select the "2ch Stereo" mode by rotating the
@PROGRAM
selector on the front panel.
• See page 72 for details about the parameters of the "2ch Stereo"
mode.
FPOt··iT L..
Front left speaker
Center speaker
Front right speaker
Surround right speaker
Surround back right speaker
Surround back left speaker
Surround left speaker
Subwoofer
Presence left speaker
Presence right speaker
~'r.r~
• Once you press
@ LEVEL
on the remote controL you can
also select the speaker by pressing
@L, I \/.
• Instead of "SB R" and "SB L", "SB" is displayed if '·SUR.
B L/R SP" is set to either "SMLx I" or "LRGx I" (see
page 81).
2
Press @<J I e> on the remote control to
adjust the speaker Olutput level.
• Press
@e>
to increase the value.
• Press
@<J
to
decreas~e
the value.
Control range: -10.0 dB to + 1 0.0 dB
53
En
Before performing the following operation, set the operation
mode selector on the remote control to
@AMP.
· Using audio features
EiliR~il1lJ"ulti-tJl(Jl1tl,l~f)1.IFCfJS
.j
n
2-channel stereo
Adjusting thespe1aker level
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the
~v1ULTI
CH INPUT jacks.
Note
This operation will override the level adjustlnents made in
"Optimizing the speaker setting for your listening room" (see
page 37) and "SPEAKER LEVEL" (see page 82).
1
Press ®LEVEL on the remote control
repeatedly to select the speaker you want to
adjust.
You can mix down multi -channel sources to 2 channels
and enjoy playback in 2-channel stereo.
Press
~STEREO
on the remote control
repeatedly to select "2ch Stereo".
,I,
~(j)~
• You can use a subwoofer with this program when "LFE/BASS
OUT" is set to "SWFR" or "BOTH" (see page 80).
• You can also select the "2ch Stereo" mode by rotating the
@PROGRAM
selector on the front panel.
• See page 72 for details about the parameters of the "2ch Stereo"
mode.
FPOt··iT L..
Front left speaker
Center speaker
Front right speaker
Surround right speaker
Surround back right speaker
Surround back left speaker
Surround left speaker
Subwoofer
Presence left speaker
Presence right speaker
~'r.r~
• Once you press
@ LEVEL
on the remote controL you can
also select the speaker by pressing
@L, I \/.
• Instead of "SB R" and "SB L", "SB" is displayed if '·SUR.
B L/R SP" is set to either "SMLx I" or "LRGx I" (see
page 81).
2
Press @<J I e> on the remote control to
adjust the speaker Olutput level.
• Press
@e>
to increase the value.
• Press
@<J
to
decreas~e
the value.
Control range: -10.0 dB to + 1 0.0 dB
53
En