Yamaha RX-V1800 Owner's Manual page 25

Connections
Information on HtJMITM
This unit has four HDMI input jacks and one HDMI output jack for digital audio and video signal input/output. Connect
the HDMI IN 1, HDMI IN 2., HDl\1I IN 3 or HDMI IN 4 jack of this unit to the HDMI output jack of other HDMI
components (such as a DVD player). Connect the HDMI OUT jack of this unit to the HDMI input jack of other HDMI
components (such as a TV and a projector).
The video or audio signals input at the HDMI IN jacks of the selected input source are output at the HDMI OUT jack of
this unit.
You can check the potential problem about the HDMI connection (see page 44).
Note
This HDMI interface of this unit is based on the following standards:
• HDMI Version 1.3a (High-Definition Multimedia Interface Specification Version 1.3a) licensed by HDMI
Licensing, LLC.
• HDCP (High-bandwidth Digital Content Protection System) licensed by Digital Content Protection, LLC.
• Default input assignment of HDMI input
jacks
• HDMI jack and cable plug
HOMI
[ [ } - - - , HDMI cable plug
INI
BD/HD DVD
IN2 DVD
IN3 DTV/CBL
• We recommend that you use a commercially available HDMI
cable shorter than 5 meters (16 feet) with the HDMI logo
printed on it.
• Use a conversion cable (HDMl jack
.(-~
DVI-D jack) to connect
this unit to other DVI cOlnponents.
IN4 DVR
Notes
• Do not disconnect or connect the cable or turn off the power of
the HDMI components connected to the HDMI OUT jack of
this unit while data is being transferred. Doing so may disrupt
playback or cause noise.
• The HDMI OUT jack outputs lthe audio signals input at the
HDMI input jacks only even if "SUPPORT AUDIO" is set to
"OTHER" (see page 88).
• If you turn off the power of the video monitor connected to the
HDMI OUT jack via a DVI connection, this unit may fail to
establish the connection to the component.
• The analog video signals input at the composite video, S-video
and component video jacks can be digitally up-converted to be
output at the HDMI OUT jack.. Set "VIDEO CONV." to "ON"
in "MANUAL SETUP" (see page 92) to activate this feature.
21
En
Connections
Information on HtJMITM
This unit has four HDMI input jacks and one HDMI output jack for digital audio and video signal input/output. Connect
the HDMI IN 1, HDMI IN 2., HDl\1I IN 3 or HDMI IN 4 jack of this unit to the HDMI output jack of other HDMI
components (such as a DVD player). Connect the HDMI OUT jack of this unit to the HDMI input jack of other HDMI
components (such as a TV and a projector).
The video or audio signals input at the HDMI IN jacks of the selected input source are output at the HDMI OUT jack of
this unit.
You can check the potential problem about the HDMI connection (see page 44).
Note
This HDMI interface of this unit is based on the following standards:
• HDMI Version 1.3a (High-Definition Multimedia Interface Specification Version 1.3a) licensed by HDMI
Licensing, LLC.
• HDCP (High-bandwidth Digital Content Protection System) licensed by Digital Content Protection, LLC.
• Default input assignment of HDMI input
jacks
• HDMI jack and cable plug
HOMI
[ [ } - - - , HDMI cable plug
INI
BD/HD DVD
IN2 DVD
IN3 DTV/CBL
• We recommend that you use a commercially available HDMI
cable shorter than 5 meters (16 feet) with the HDMI logo
printed on it.
• Use a conversion cable (HDMl jack
.(-~
DVI-D jack) to connect
this unit to other DVI cOlnponents.
IN4 DVR
Notes
• Do not disconnect or connect the cable or turn off the power of
the HDMI components connected to the HDMI OUT jack of
this unit while data is being transferred. Doing so may disrupt
playback or cause noise.
• The HDMI OUT jack outputs lthe audio signals input at the
HDMI input jacks only even if "SUPPORT AUDIO" is set to
"OTHER" (see page 88).
• If you turn off the power of the video monitor connected to the
HDMI OUT jack via a DVI connection, this unit may fail to
establish the connection to the component.
• The analog video signals input at the composite video, S-video
and component video jacks can be digitally up-converted to be
output at the HDMI OUT jack.. Set "VIDEO CONV." to "ON"
in "MANUAL SETUP" (see page 92) to activate this feature.
21
En