Advanced Setup; Using The Advanced Setup Menu - Yamaha RX-V1800 Owner's Manual

Advanced setup
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
Notes
• The settings you make are reflected next time you press
@MASTER ON/OFF
inward to the ON position to turn on this unit (see
page 33).
• Only
@MASTER ON/OFF, (Q)STRAIGHT
and the
@PROGRAM
selector are effective while you are using the advanced setup
(Jsinglhe·.·. • a dvanced·selupmenu
Press @MASTER
~~N/OFF
on the front
panel to release it outward to the OFF
position to turn off this unit.
menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.
• Speaker impedance ~::;PE:i:::ii<E:I:;~~
I I":' I F:
n
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices:
ao
MIN, 60 MIN
• Select "80 MIN" to set the speaker impedance to 8 0 .
• Select "60 MIN" to set the speaker impedance to 6 0 .
1
4
Press @STRAIGH1" repeatedly to change
the selected parameter
sE~tti
ng.
3 Rotate the ®PROGI~M selector to select
the parameter you want t4:l adjust.
The name of the selected parameter appears in the
front panel display.
The impedance of each
speaker must be 8 r2 or
higher.
The impedance of each
speaker must be 4 r2 or
higher.
Front
Front
Centcr
Center
Surround
Surround
Surround back
Surround back
t - - - - - - - - - -
The impedancc of each
speaker must be 6
n
or
1 - - - - - - - - - higher.
1 - - - - - - - - - -
The impedance of cach
speaker must be 8 r2 or
t - - - - - - - - - -
higher.
6r2MIN
8r2MIN
While holding
down
~~
STRAIGHT
~
~~~20
2
Press and hold @S'~RAIGHT and then
press @MASTER OIN/OFF inward to the ON
position to turn on this unit.
This unit turns on, and "ADV1\.NCED MENU"
appears in the front panel display.
5 Press @MASTER C~N/OFF to release it
outward to the OFF position to save the new
setting and turn off this unit.
~\r.r~
The settings you made are reflected next time you turn on this
unit.
• Remote sensor
i:;~~EI':'II]"rE ~::;Ei···I~::;C)P
Use this feature to activate or deactivate the signal-
receiving capability of the remote control sensor on the
front panel of this unit.
Choices: ON, OFF
• Select "ON" if you want to activate the signal-
receiving capability of the remote control sensor.
• Select "OFF" if you want to deactivate the signal-
receiving capability of the remote control sensor.
Note
We recommend that you set the parameter to "'ON" in most cases.
117
En
Advanced setup
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
Notes
• The settings you make are reflected next time you press
@MASTER ON/OFF
inward to the ON position to turn on this unit (see
page 33).
• Only
@MASTER ON/OFF, (Q)STRAIGHT
and the
@PROGRAM
selector are effective while you are using the advanced setup
(Jsinglhe·.·. • a dvanced·selupmenu
Press @MASTER
~~N/OFF
on the front
panel to release it outward to the OFF
position to turn off this unit.
menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.
• Speaker impedance ~::;PE:i:::ii<E:I:;~~
I I":' I F:
n
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices:
ao
MIN, 60 MIN
• Select "80 MIN" to set the speaker impedance to 8 0 .
• Select "60 MIN" to set the speaker impedance to 6 0 .
1
4
Press @STRAIGH1" repeatedly to change
the selected parameter
sE~tti
ng.
3 Rotate the ®PROGI~M selector to select
the parameter you want t4:l adjust.
The name of the selected parameter appears in the
front panel display.
The impedance of each
speaker must be 8 r2 or
higher.
The impedance of each
speaker must be 4 r2 or
higher.
Front
Front
Centcr
Center
Surround
Surround
Surround back
Surround back
t - - - - - - - - - -
The impedancc of each
speaker must be 6
n
or
1 - - - - - - - - - higher.
1 - - - - - - - - - -
The impedance of cach
speaker must be 8 r2 or
t - - - - - - - - - -
higher.
6r2MIN
8r2MIN
While holding
down
~~
STRAIGHT
~
~~~20
2
Press and hold @S'~RAIGHT and then
press @MASTER OIN/OFF inward to the ON
position to turn on this unit.
This unit turns on, and "ADV1\.NCED MENU"
appears in the front panel display.
5 Press @MASTER C~N/OFF to release it
outward to the OFF position to save the new
setting and turn off this unit.
~\r.r~
The settings you made are reflected next time you turn on this
unit.
• Remote sensor
i:;~~EI':'II]"rE ~::;Ei···I~::;C)P
Use this feature to activate or deactivate the signal-
receiving capability of the remote control sensor on the
front panel of this unit.
Choices: ON, OFF
• Select "ON" if you want to activate the signal-
receiving capability of the remote control sensor.
• Select "OFF" if you want to deactivate the signal-
receiving capability of the remote control sensor.
Note
We recommend that you set the parameter to "'ON" in most cases.
117
En