Yamaha RX-V1800 Owner's Manual page 86

Customizing this unit (MANUAL SETUP)
Subwoofer phase
SUBl.dOOFEP PHHSE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
• Speaker level 8)SPERKER LEUEL
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in "SPEAKER SET" (see page 80).
Control range: -10.0 dB to +10.0 dB
Control step: 0.5 dB
Initial setting:
FR.L/FR.R/SWFR/PR.L/PR.R: 0 dB
CENT./SUR.L/SUR.R/SB L/SB R: -1.0 dB
1"
E:) ~:F'EHI<EP LEI')EL.
NORMAL
(normal)
REVERSE
(reverse)
Does not change the phase of your subwoofer.
Sets the phase of your subwoofer to reverse.
+
-t
r:~::.L
- . ..-... - ..""".".- ...-... - ..
F'F:" P •••••••••"•••••••••
C:EI·'~T
••••••••• ,••••••••••
~:uP.
L.········I··········
::::UP.
p ,...•••••••
~r6l
t61
~
~ ;;1
r;
+
-···-···-··"-1"-"-"'-'"
········1··········
......... " .
·········11·········
·········11·········
~t61 ~ ~
;1
~;
Ii
Presence/surround back channel priority
PPIOPIT\'
Use this feature to prioritize either the presence or the
surround back speakers when playing back 2-channel
audio sources using the sound field programs.
FR.L Front left speaker
FR.R Front right speaker
CENT.
Center speaker
SUR.L Surround left speaker
SUR.R Surround right speaker
S8 L
Surround back left speaker
S8 R
Surround back right speaker
SWFR Subwoofer
PR.L
Presence left speaker
PR.R
Presence right speaker
~'<il~
For details about the sound output from each speaker in sound
field programs, refer to "Sound output in each sound field
program" in "APPENDIX" at the end of this manual.
PRNS
SUR.S
Uses the presence speakers.
Uses the surround back speakers.
,I,
~Ci>~
• If your subwoofer can adjust the output volume and the
crossover frequency, set the volume to about half way (or
slightly less) and set the crossover frequency to the maximum.
• Set "TEST TONE" to "ON" to output the test tone for the
"SPEAKER LEVEL" setting (see page
83).
Notes
• The available speaker channels differ depending on the setting
of the speakers.
• Instead of "SB L" and "S8 R", "S8" is displayed if "SUR. B L/
R SP" is set to either "SMLx I" or "LRGx I" (see page
81).
82
En
Customizing this unit (MANUAL SETUP)
Subwoofer phase
SUBl.dOOFEP PHHSE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
• Speaker level 8)SPERKER LEUEL
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in "SPEAKER SET" (see page 80).
Control range: -10.0 dB to +10.0 dB
Control step: 0.5 dB
Initial setting:
FR.L/FR.R/SWFR/PR.L/PR.R: 0 dB
CENT./SUR.L/SUR.R/SB L/SB R: -1.0 dB
1"
E:) ~:F'EHI<EP LEI')EL.
NORMAL
(normal)
REVERSE
(reverse)
Does not change the phase of your subwoofer.
Sets the phase of your subwoofer to reverse.
+
-t
r:~::.L
- . ..-... - ..""".".- ...-... - ..
F'F:" P •••••••••"•••••••••
C:EI·'~T
••••••••• ,••••••••••
~:uP.
L.········I··········
::::UP.
p ,...•••••••
~r6l
t61
~
~ ;;1
r;
+
-···-···-··"-1"-"-"'-'"
········1··········
......... " .
·········11·········
·········11·········
~t61 ~ ~
;1
~;
Ii
Presence/surround back channel priority
PPIOPIT\'
Use this feature to prioritize either the presence or the
surround back speakers when playing back 2-channel
audio sources using the sound field programs.
FR.L Front left speaker
FR.R Front right speaker
CENT.
Center speaker
SUR.L Surround left speaker
SUR.R Surround right speaker
S8 L
Surround back left speaker
S8 R
Surround back right speaker
SWFR Subwoofer
PR.L
Presence left speaker
PR.R
Presence right speaker
~'<il~
For details about the sound output from each speaker in sound
field programs, refer to "Sound output in each sound field
program" in "APPENDIX" at the end of this manual.
PRNS
SUR.S
Uses the presence speakers.
Uses the surround back speakers.
,I,
~Ci>~
• If your subwoofer can adjust the output volume and the
crossover frequency, set the volume to about half way (or
slightly less) and set the crossover frequency to the maximum.
• Set "TEST TONE" to "ON" to output the test tone for the
"SPEAKER LEVEL" setting (see page
83).
Notes
• The available speaker channels differ depending on the setting
of the speakers.
• Instead of "SB L" and "S8 R", "S8" is displayed if "SUR. B L/
R SP" is set to either "SMLx I" or "LRGx I" (see page
81).
82
En