Yamaha RX-V1800 Owner's Manual page 96
Hide thumbs
Also See for RX-V1800:
- Owner's manual (841 pages) ,
- Service manual (182 pages) ,
- Owner's manual (565 pages)
Table of Contents
Advertisement
Customizing this unit (MANUAL SETUP)
•
Video settings [:)
i.)
I[)[)::)
~:::;E:T'
Front panel display scroll
Fl. .
~:::;C:I:;~~()I
. . . . i. . . .
Use this feature to set the mode to display the XM
Satellite Radio information or iPod menu (such as song
title or channel name) in the front panel display.
Deactivates the analog interlace/progressive up-
conversion of the analog video signals.
Activates the analog interlace/progressive up-
conversion of the analog video signals.
OFF
ON
Component interlace/progressive up-conversion
C:()1"' \
F'
01" , 1
E:
I'"j'r
I . . . . .
P
Use this feature to activate or deactivate the analog
interlace/progressive conversion of the analog video
signals input at the composite video, S-video and
component video jacks so that the analog video signals
deinterlaced from 480i (NTSC)/576i (PAL) to 480p/576p
are output at the COMPONENT MONITOR OUT jacks.
Scroll-once mode.
Selcct this to display the operation status in the
front panel display hy the first 14 alphanumeric
characters after scrolling all characters once.
Continuous mode.
Select this to display the operation status in the
front panel display in a continuous manner.
ONCE
CONT
Notes
..
~.
,.... ,"', ,...";';, ..;;". ,,;;.. '.', "r'
• The "COMPONENT liP" parameter appears only when you set
"VIDEO CONV." to "ON".
• If your video monitor does not support analog video signals
with 480p/576p of resolution. the SET MENU items may not be
displayed on your video monitor when "COMPONENT liP" is
set to "ON", In such a case. set the "COMPONENT liP"
parameter to "OFF".
Video conversion
i.)
I [)EJ)
c:cn'··p.)"
lJse this feature to set whether to convert the video signals
input at the VIDEO, S VIDEO, and COMPONENT
VIDEO jacks.
ON
Converts composite. S-video. and component
video signals interchangeahly and up-converts
composite. S-video. and component video
signals to HDMI video signals.
HOMI scaling
H[)I"1 I
~:::;C::!=ll...,
II··,IG
Use this feature to activate or deactivate the HOMI up-
scaling of the analog video signals input at the VIDEO, S
VIDEO and COMPONENT VIDEO jacks so that the up-
scaled video signals are output at the HOMI OUT jack.
This unit up-scales the video signals as follows:
480i (NTSC)/576i (PAL)
~
480p/576p, l080i, 720p,
or I080p
480p/576p
~
l080i, 720p, or I080p
OFF
Docs not convert any signals.
This unit does not up-scale the analog component video signals
with 720p or 1080i of resolution.
Notes
• This unit does not convert 480 line video signals and 576 line
vidco signals interchangeahly.
• The analog component video signals with 480i (NTSC)/576i
(PAL) of resolution are converted into the S-video or composite
vidco signals and output at the S VIDEO MONITOR OUT and
VIDEO MONITOR OUT jacks.
• Thc convcrted video signals arc only output at the MONITOR
OUT jacks. When recording a vidco source. you must make the
same type of video connections hetween each component.
• When composite video or S-video signals from a VCR are
converted into component vidco signals. the picture quality may
suffer depending on your VCR.
• Set "VIDEO CONV:' to "ON" to display the sound field
parameter display and short message display.
• Unconventional signals input at the composite video or S-video
jacks cannot he converted or may he output ahnormally. In such
cases. set "VIDEO CONV:' to "OFF'.
THROUGH
480p (or
576p). I080i.
720p. I080p
Note
Does not up-scale any analog video signals.
Up-scales analog video signals to 480p or 576p.
1080i, 720p. or 1080p of resolution.
92
En
Customizing this unit (MANUAL SETUP)
•
Video settings [:)
i.)
I[)[)::)
~:::;E:T'
Front panel display scroll
Fl. .
~:::;C:I:;~~()I
. . . . i. . . .
Use this feature to set the mode to display the XM
Satellite Radio information or iPod menu (such as song
title or channel name) in the front panel display.
Deactivates the analog interlace/progressive up-
conversion of the analog video signals.
Activates the analog interlace/progressive up-
conversion of the analog video signals.
OFF
ON
Component interlace/progressive up-conversion
C:()1"' \
F'
01" , 1
E:
I'"j'r
I . . . . .
P
Use this feature to activate or deactivate the analog
interlace/progressive conversion of the analog video
signals input at the composite video, S-video and
component video jacks so that the analog video signals
deinterlaced from 480i (NTSC)/576i (PAL) to 480p/576p
are output at the COMPONENT MONITOR OUT jacks.
Scroll-once mode.
Selcct this to display the operation status in the
front panel display hy the first 14 alphanumeric
characters after scrolling all characters once.
Continuous mode.
Select this to display the operation status in the
front panel display in a continuous manner.
ONCE
CONT
Notes
..
~.
,.... ,"', ,...";';, ..;;". ,,;;.. '.', "r'
• The "COMPONENT liP" parameter appears only when you set
"VIDEO CONV." to "ON".
• If your video monitor does not support analog video signals
with 480p/576p of resolution. the SET MENU items may not be
displayed on your video monitor when "COMPONENT liP" is
set to "ON", In such a case. set the "COMPONENT liP"
parameter to "OFF".
Video conversion
i.)
I [)EJ)
c:cn'··p.)"
lJse this feature to set whether to convert the video signals
input at the VIDEO, S VIDEO, and COMPONENT
VIDEO jacks.
ON
Converts composite. S-video. and component
video signals interchangeahly and up-converts
composite. S-video. and component video
signals to HDMI video signals.
HOMI scaling
H[)I"1 I
~:::;C::!=ll...,
II··,IG
Use this feature to activate or deactivate the HOMI up-
scaling of the analog video signals input at the VIDEO, S
VIDEO and COMPONENT VIDEO jacks so that the up-
scaled video signals are output at the HOMI OUT jack.
This unit up-scales the video signals as follows:
480i (NTSC)/576i (PAL)
~
480p/576p, l080i, 720p,
or I080p
480p/576p
~
l080i, 720p, or I080p
OFF
Docs not convert any signals.
This unit does not up-scale the analog component video signals
with 720p or 1080i of resolution.
Notes
• This unit does not convert 480 line video signals and 576 line
vidco signals interchangeahly.
• The analog component video signals with 480i (NTSC)/576i
(PAL) of resolution are converted into the S-video or composite
vidco signals and output at the S VIDEO MONITOR OUT and
VIDEO MONITOR OUT jacks.
• Thc convcrted video signals arc only output at the MONITOR
OUT jacks. When recording a vidco source. you must make the
same type of video connections hetween each component.
• When composite video or S-video signals from a VCR are
converted into component vidco signals. the picture quality may
suffer depending on your VCR.
• Set "VIDEO CONV:' to "ON" to display the sound field
parameter display and short message display.
• Unconventional signals input at the composite video or S-video
jacks cannot he converted or may he output ahnormally. In such
cases. set "VIDEO CONV:' to "OFF'.
THROUGH
480p (or
576p). I080i.
720p. I080p
Note
Does not up-scale any analog video signals.
Up-scales analog video signals to 480p or 576p.
1080i, 720p. or 1080p of resolution.
92
En
Advertisement
Table of Contents
