Option Menu - Yamaha RX-V1800 Owner's Manual

Customizing this unit (MANUAL SETUP)
Gray back
I3PH'r' BHCK
Use this feature to display a gray background in your
video monitor when there is no video signal being input.
Displays a gray background on your video
monitor when there is no video signal being
input.
Does not display a gray background on your
video monitor.
AUTO
OFF
Use this menu to adjust the optional system parameters.
• Display settings
n)
DI
SPLH ' /
SET
Note
Use "VIDEO" of "INITIALIZE" in "ADVANCED SETUP" to
set "OSD SHIFT" and "GRAY BACK" to the factory presets (see
page 120).
• Depending on the video signals being input or the system
setting of your video monitor (NTSC or PAL), the OSD may be
displayed abnormally. In such cases, set "GRAY BACK" to
"OFF".
• Even when "GRAY BACK" is set to "OFF", the OSD may not
be displayed correctly depending on the conditions of the
picture.
The short Inessage display does not appear in the following cases:
- when the component video signals with 480p/576p, 720p,
1080i or 1080p resolutions are input
- When HOMI video signals are input
Deactivates the short message display function.
Activates the short message display function.
The contents of the front panel display appear at
the bottom of the screen each time you operate
this unit.
OFF
ON
Note
On-screen display time
CH'~ ~;CPEEt·~
Use this feature to set the time for which the XM Satellite
Radio information or iPod menu is displayed in the OSD
after you perform a certain operation.
Short message display
SHOPT t'1E~;~;HI3E
Use this feature to activate or deactivate the short message
display function.
OSD shift
OSD SH I FT
Use this feature to adjust the vertical position of the OSD.
Control range: -5 (downward) to +5 (upward)
Control step: 1
Initial setting: 0
• Press
@<j
to lower the position of the OSD.
• Press @I> to raise the position of the OSD.
Dimmer
DI
t , 1t ' 1 EP
Use this feature to adjust the brightness of the front panel
display.
Control range: - 4 to 0
Control step: 1
• Press @<j to make the front panel display dimmer.
• Press
@I>
to make the front panel display brighter.
ALWAYS Displays the OSD unceasingly during an
operation.
lOS Turns off the OSD 10 seconds after you perform
a certain operation.
305
Turns off the OSD 30 seconds after you perform
a certain operation.
91
En
Customizing this unit (MANUAL SETUP)
Gray back
I3PH'r' BHCK
Use this feature to display a gray background in your
video monitor when there is no video signal being input.
Displays a gray background on your video
monitor when there is no video signal being
input.
Does not display a gray background on your
video monitor.
AUTO
OFF
Use this menu to adjust the optional system parameters.
• Display settings
n)
DI
SPLH ' /
SET
Note
Use "VIDEO" of "INITIALIZE" in "ADVANCED SETUP" to
set "OSD SHIFT" and "GRAY BACK" to the factory presets (see
page 120).
• Depending on the video signals being input or the system
setting of your video monitor (NTSC or PAL), the OSD may be
displayed abnormally. In such cases, set "GRAY BACK" to
"OFF".
• Even when "GRAY BACK" is set to "OFF", the OSD may not
be displayed correctly depending on the conditions of the
picture.
The short Inessage display does not appear in the following cases:
- when the component video signals with 480p/576p, 720p,
1080i or 1080p resolutions are input
- When HOMI video signals are input
Deactivates the short message display function.
Activates the short message display function.
The contents of the front panel display appear at
the bottom of the screen each time you operate
this unit.
OFF
ON
Note
On-screen display time
CH'~ ~;CPEEt·~
Use this feature to set the time for which the XM Satellite
Radio information or iPod menu is displayed in the OSD
after you perform a certain operation.
Short message display
SHOPT t'1E~;~;HI3E
Use this feature to activate or deactivate the short message
display function.
OSD shift
OSD SH I FT
Use this feature to adjust the vertical position of the OSD.
Control range: -5 (downward) to +5 (upward)
Control step: 1
Initial setting: 0
• Press
@<j
to lower the position of the OSD.
• Press @I> to raise the position of the OSD.
Dimmer
DI
t , 1t ' 1 EP
Use this feature to adjust the brightness of the front panel
display.
Control range: - 4 to 0
Control step: 1
• Press @<j to make the front panel display dimmer.
• Press
@I>
to make the front panel display brighter.
ALWAYS Displays the OSD unceasingly during an
operation.
lOS Turns off the OSD 10 seconds after you perform
a certain operation.
305
Turns off the OSD 30 seconds after you perform
a certain operation.
91
En