Table of Contents
Advertisement
■
Firmware Update
Displays information about the firmware update.
Firmware Update
Updates the firmware via the network. You can also check the firmware version and system ID.
Choices
Firmware Version
Displays the version of the firmware installed on the unit.
System ID
Displays the system ID number.
X
• Firmware update takes about 20 minutes or more (depending on your Internet connection speed).
• If the Internet connection speed is slow, or the unit is connected to the wireless network, network update may
not be possible depending on the condition of the wireless connection. In this case, wait a while before
updating the firmware again, or update the firmware using the USB memory device. For details on using the
USB memory device, see "Updating the firmware (FIRM. UPDATE)" (p.159).
USB Update
Perform a firmware update using a USB memory device from the "ADVANCED SETUP" menu.
X
For information about updating the firmware using a USB memory device, see "Updating the firmware (FIRM.
UPDATE)" (p.159) in "Configuring the system settings (ADVANCED SETUP menu)".
Configuring the system settings
(ADVANCED SETUP menu)
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press MAIN ZONE z.
MAIN ZONE z
STRAIGHT
PROGRAM
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press MAIN ZONE z to set the unit to standby mode and turn it on again.
The new settings take effect.
155
En
Advertisement
Table of Contents
