Post Error Messages - Sun Microsystems SPARCclassic Service Manual

TABLE 3–2
DMA2 E_CSR Register Test
LANCE Address Port Tests
LANCE Data Port Tests
DMA2 D_CSR Register Test
DMA2 D_ADDR Register Test
DMA2 D_BCNT Register Test
DMA2 D_NADDR Register Test
ESP Registers Tests
DMA2 P_CSR Register Test
DMA2 P_ADDR Register Test
DMA2 P_BCNT Register Test
PPORT Registers Tests
NVRAM Access Test
TOD Registers Test

POST Error Messages

The POST error messages returned to the terminal are self-explanatory. For example,
if no DSIMM is installed in the system, POST will tell you that no DSIMM is
installed and the slot number of the SIMM slot. Use the error messages returned by
POST to troubleshoot the system.
SPARCclassic/SPARCclassic X/SPARCstation LX Service Manual ♦ Revision A, November 1993
28
Listing of POST Tests
(continued)