Security Menu - Fujitsu PRIMERGY RX600 S4 User Manual

7.2.11 Security Menu

This menu is for security options.
Main Advanced
Supervisor Password :
User Password :
Set Supervisor Password :
Setup Password Lock :
Set User Password :
Password on boot :
Setup Prompt :
Flash Write :
Info
F1
Esc Exit
Item
Supervisor Password
User Password
Set Supervisor
Password
Setup Password Lock
Set User Password
Password on boot
Setup Prompt
Flash Write
Phoenix TrustedCore(tm) Setup Utility
Security Power
Not installed
Not installed
[Enter]
[Standard]
[Enter]
[Disabled]
[Enabled]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Security menu
Setting
Displays whether a supervisor password is set.
• Not Installed: A password is not set yet.
• Installed: A password is already set.
Displays whether a user password is set.
• Not Installed: A password is not set yet.
• Installed: A password is already set.
Sets a supervisor password. Once the password is set, password entry is required when
BIOS Setup Utility is started up.
Press the [Enter] key to display the password entry window. Enter the supervisor
password. For details, refer to "8.4.2 Security against Unauthorized Use" ( pg.197).
• Standard (Initial value)
• Extended
Sets a user password. Once the password is set, password entry is required when you
access the server. This password can be set when [Supervisor Password] has been set.
Press the [Enter] key to display the password entry window. Enter the user password.
For details, refer to "8.4.2 Security against Unauthorized Use" ( pg.197).
• Disabled (Initial value)
• Enabled
• Disabled
• Enabled (Initial value)
• Disabled
• Enabled (Initial value)
PRIMERGY RX600 S4 User's Guide
Exit
Server Boot
Item Specific Help
Setup Defaults
F9
Save and Exit
Sub-Menu F10
Description
Sets a scope of protection with the supervisor password.
Setting [Supervisor Password] is necessary to use this
function.
Sets whether to enable or disable to enter the password
at system startup.
This item can be set when [User Password] has been set.
Sets whether to display the setup message, "<F2> BIOS
Setup / <F12> Boot Menu" at POST when restarting the
system.
Sets whether to write-protect the BIOS Flash ROM.
163