The Security Menu - Fujitsu PRIMERGY RX300 S3 User Manual

8.1.11 The Security Menu

The Security menu sets the security options.
Main Advanced
Setup Password
System Password
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Load:
Setup Prompt:
Virus Warning:
Diskette Write:
Flash Write:
Help
F1
Exit
Esc
Item
Setup Password
System Password
Set Setup Password
Setup Password Lock
Set System Password
System Password Mode
System Load
Setup Prompt
PhoenixBIOS Setup Utility
Security Server
Not installed
Not installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[Standard]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
table: Items on the Security Menu
Setting
Displays whether or not the setup password required for the setup is set.
When the password is not set, "Not Installed" is displayed. When the password is
set, "Installed" is displayed.
Displays whether or not the system password is set.
When the password is not set, "Not Installed" is displayed. When the password is
set, "Installed" is displayed.
Sets the setup password. A setup password prevents starting the BIOS Setup
without permission.
Select this field and press the [Enter] key, and then input the setup password.
For how to set, change, or delete the password, see "9.4.2 Security against
Unauthorized Use" ( pg.279).
• Standard (Initial value)
• Extended
Sets the system password. The system password prevents unauthorized access to
the system.
The setup password must already be set.
Select this field and press the [Enter] key, and then input the system password.
For how to set, change, or delete the password, see "9.4.2 Security against
Unauthorized Use" ( pg.279).
• System (Initial value)
• Keyboard
• Standard (Initial value)
• Diskette/CDROM Lock
• Disabled
• Enabled (Initial value)
PRIMERGY RX300 S3 User's Guide
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Description
Sets the range of protection by the setup password.
The setup password must already be set.
Sets the range of protection by the system
password. The setup password and the system
password must already be set.
Sets whether to enable or disable system startup
from a floppy disk or CD-ROM.
Sets whether or not to display the setup message
"<F2> BIOS Setup / <F12> Boot Menu" in the
POST screen when system is restarted.
8
245