Removing And Installing Seat Occupied Sensor, Front Passenger Side G128 , As Of Model Year 2012 - Volkswagen Jetta 2011 Service Manual

Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, interior - Edition 06.2012
Further installation is carried out in reverse order of removal. Ob‐
serve the following:
– After installation, carry out a function check with ignition
switched on.
WARNING
Battery must be connected with ignition switched on. If pyro‐
technic components (e.g. airbag, seat belt tensioners) are
repaired incorrectly, undesired triggering may occur after the
battery is connected. Ensure that nobody is in vehicle when
connecting battery.
– Connect battery earth cable with ignition switched on ⇒ Elec‐
trical system; Rep. gr. 27 ; Battery; Connecting and discon‐
necting battery .
10.2 Removing and installing seat occupied
sensor, front passenger side -G128- , as
of model year 2012 ▶
Special tools and workshop equipment required
118
Rep. gr.69 - Passenger protection