Assembly Overview - Front Seat "Sport; Assembly Overview - Front Seat Sport - Volkswagen Jetta 2011 Service Manual

Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, interior - Edition 06.2012
❑ Clipped onto seat frame
❑ Removing and installing
9 - Seat occupied recognition control unit -J706-
❑ Can be diagnosed
❑ The necessity for replacement of the seat occupied recognition control unit -J706- does not mean that
the pressure sensor for seat occupied recognition -G452- has to be replaced as well.
❑ Removing and installing
10 - Connector
❑ Connector for connecting pressure sensor for seat occupied recognition -G452- to seat occupied rec‐
ognition control unit -J706- .
❑ Make sure that wiring is laid correctly
11 - Connector
❑ Power supply connector for seat occupied recognition control unit -J706-
12 - Connector
❑ Point where seat occupied recognition electronics are coupled to onboard supply
13 - Wiring harness for front seat
11.5

Assembly overview - front seat "Sport"

1 - Wiring harness
❑ Wiring harness with
connector for pressure
sensor for seat occu‐
pied recognition -G452-
❑ Make sure that wiring is
laid correctly
⇒ page 130
2 - Front seat padding
❑ Do not separate from
pressure sensor for seat
occupied recognition -
G452- .
❑ If the components are
separated from each
other, they are both to
be renewed.
❑ However, the seat occu‐
pied recognition control
unit -J706- does not
have to be renewed
3 - Positioning aids
❑ Positioning aides on
padding of front seat
cushion
❑ Before gluing, position‐
ing aids must be aligned
with the positioning aids
of the pressure sensor
for seat occupied recog‐
nition -G452-
⇒ Item 4 (page 128)
4 - Positioning aids
❑ Positioning aids on
pressure sensor for seat
128
Rep. gr.69 - Passenger protection
⇒ page 141 .
⇒ page 139 .
⇒ page 130
.