Volkswagen Jetta 2011 Service Manual page 229

♦ Release tool -T10236-
Removing
– Switch off ignition.
– Remove luggage compartment floor covering
– Remove backrest ⇒ page 271
– Remove rear lock carrier cover
– Remove retaining clips -1-.
– Pull trim -2- off in -direction of arrow-. While doing so, remove
trim from rear lid seal beading.
– Depending on the vehicle's equipment, disconnect the corre‐
sponding wiring harnesses and remove trim -2- from vehicle.
Note
The rear wheel housing trim can remain installed. Trim -2- can be released carefully from rear wheel housing
trim.
General body repairs, interior - Edition 06.2012
⇒ page 216
.
⇒ page 218 .
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
5. Luggage compartment trims
223