Centre Console; Removing And Installing »Basic« Centre Console - Volkswagen Jetta 2011 Service Manual

Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, interior - Edition 06.2012
3

Centre console

⇒ "3.1 Removing and installing Basic centre console",
page 26
⇒ "3.2 Removing and installing Comfort and Highline centre con‐
sole", page 30
⇒ "3.3 Removing and installing rear trim of Comfort and Highline
centre console", page 34
⇒ "3.4 Removing and installing rear trim bracket of Comfort and
Highline centre console", page 36
⇒ "3.5 Removing and installing lid of rear storage compartment of
Comfort and Highline centre console", page 37
⇒ "3.6 Removing and installing centre console securing bracket",
page 38
3.1 Removing and installing »Basic« centre
console
Removing
– Switch off ignition.
Vehicles with automatic gearbox
– Move selector lever to position "N".
– Release selector lever cover along with handle from cover ⇒
Automatic gearbox 09G - 6-gear; Rep. gr. 37 ; Selector mech‐
anism .
Vehicles with manual gearbox
– Release boot along with gearstick knob from cover ⇒ Rep. gr.
34 ; Repairing selector mechanism .
Vehicles with dual clutch gearbox
– Move selector lever to position "N".
– Release selector lever cover along with handle from cover ⇒
Dual clutch gearbox 02E; Rep. gr. 34 ; Selector mechanism .
All vehicles
– Remove handbrake lever trim ⇒ Brake system; Rep. gr. 46 ;
Assembly overview - handbrake lever .
– Remove lining mat -2- from centre console -1- in
-direction of arrow-.
– Unclip cover cap -4- on both sides and unscrew bolt -3-
(1.5 Nm).
– Move handbrake lever -5- to highest position.
26
Rep. gr.68 - Interior equipment