Volkswagen Jetta 2011 Service Manual page 270

Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, interior - Edition 06.2012
♦ Torque wrench -V.A.G 1331-
Removing
WARNING
♦ Follow safety regulations for pyrotechnic components
⇒ page 1 .
♦ Before handling pyrotechnic components (e.g. separating
the electrical connector), the person handling them must
"electrically discharge" himself/herself. To do this e.g.
briefly touch the door striker plate.
– Mount seat repair stand -VAS 6136- on engine and gearbox
support -VAS 6095- .
– Remove front seat ⇒ page 244
– Fasten seat on seat repair stand -VAS 6136- .
– Remove left trim on seat:
♦ Left trim on seat without adjustable seat height
♦ Left trim on seat with manually adjustable seat height
⇒ page 252 .
♦ Left trim on seat with electrically adjustable seat height
⇒ page 254 .
– Remove right trim on seat
All vehicles
– Disconnect wiring harnesses from side airbag and, if neces‐
sary, wiring harnesses of seat heater from seat frame and lay
wiring harnesses to side.
– Unscrew bolts -2- and -4- (35 Nm).
Note
The bolts are microencapsulated and must be renewed each time they are removed.
♦
Before new bolts are installed, the threads of the corresponding holes must be cleaned.
♦
– Remove backrest -3- from seat frame -1-.
264
Rep. gr.72 - Seat frames
.
⇒ page 250
⇒ page 257 .
.