Removing And Installing Rear Outer Three-Point Seat Belt - Volkswagen Jetta 2011 Service Manual

Hide thumbs Also See for Jetta 2011:
Table of Contents

Advertisement

Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, interior - Edition 06.2012
– Further installation is performed in the reverse order of re‐
moval.
WARNING
Battery must be connected with ignition switched on. If pyro‐
technic components (e.g. airbag, seat belt tensioners) are
repaired incorrectly, undesired triggering may occur after the
battery is connected. Ensure that nobody is in vehicle when
connecting battery.
– Connect battery earth cable with ignition switched on ⇒ Elec‐
trical system; Rep. gr. 27 ; Battery; Connecting and discon‐
necting battery .
1.4
Removing and installing rear outer
three-point seat belt
Note
Removal and installation are described for the left vehicle side.
Follow same instructions for the right side as appropriate.
62
Rep. gr.69 - Passenger protection

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jetta hybrid 2013

Table of Contents