Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, interior - Edition 06.2012
Installing
– Install in reverse order of removal.
Note
Before installing, check all fasteners for damage and renew if
♦
necessary.
Following installation, ensure that trim is positioned in door
♦
seal beading.
4.9
Removing and installing sill moulding
Note
Removal and installation are described for the left vehicle side.
Follow same instructions for the right side as appropriate.
Special tools and workshop equipment required
206
Rep. gr.70 - Trim, insulation