Volkswagen Jetta 2011 Service Manual page 305

– On the rear of the backrest, lever the sections -arrows- out of
the mountings of the backrest frame -2-, using a screwdriver.
– Fold over cover -7- at the sides.
Note
The illustration shows how the -7- cover is fastened in place in the »Comfort« equipment version. The seat
covers of the »Basic« and »Sport« versions are fastened in the same way.
– Detach clamping strips -4- from anchoring clips -5-. To do this,
lever open jaws of anchoring clips -5- with the help of a small
screwdriver and pull out clamping strips -4-.
– Detach all the padding clips -6-.
– Take cover -7- off padding -3-.
– Remove padding -3- from backrest frame -1-.
Note
When doing this, carefully pull cover -7- and padding -3- over the head restraint guides.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, interior - Edition 06.2012
2. Rear seat covers and padding
299