Volkswagen Jetta 2011 Service Manual page 207

– Remove bolt -1- (40 Nm).
– Thread belt end anchor together with seat belt -2- through the
hole in the trim.
Installing
Note
Before installing, check all fasteners for damage and renew if necessary.
♦
When installing, the belt adjuster slide and the button of the trim must be in the same position.
♦
The »Airbag« emblem -1- must be replaced.
♦
Following installation, ensure that trim is positioned in door seal beading.
♦
– Install in reverse order of removal.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, interior - Edition 06.2012
201
4. Interior trims