Removing And Installing Driver Or Front Passenger Side Air Vents - Volkswagen Passat 2011 Workshop Manual

♦ Removal wedge - 3409-
Removing
– Unclip centre vent -1- from dash panel starting at bottom
-arrows A- then at top -arrows B- using wedge - 3409- .
– Separate connector for illumination of centre vent.
Installing
Installation is carried out in the reverse order. When installing,
note the following:
– Insert centre vent in dash panel at top first -arrows A-.
– When clipping in centre vent, observe adjustment -arrow B-
on dash panel.
– Observe routing of cable for illumination.
6.3 Removing and installing driver or front
passenger side air vents
Special tools and workshop equipment required
♦ Removal wedge - 3409-
Passat 2011 ➤ , Passat Variant 2011 ➤
Heating, air conditioner - Edition 06.2017
97
6. Air duct