Wiring Loom Handle Socket Replacement - Minelab F3 COMPACT Service Manual

_______________________________________________________________________________________________________________________

3.9.4 Wiring Loom Handle Socket Replacement

a. The wiring loom handle socket is a line replaceable unit and is available as a service kit,
3004-0056 Wiring loom Handle Socket Kit, which includes associated parts. Figure 98 illustrates
the major parts of wiring loom handle Socket.
1 3004-0056
2 30-29011-519
3 9511-0136
4 30-05214-003
b. Open the detector body as described in Section
completed:
Disconnect the wiring loom handle socket from the handle wiring loom.
•
Disconnect the wiring loom handle socket from the interface PCB. Figure 99.
•
Remove the E-Clip from the wiring loom handle socket at the entry point to the detector
•
body.
Figure 98: Wiring Loom Handle Socket Kit
Wiring Loom Handle Socket Kit, contains all
items in this table
O-Ring BS012
Wiring Loom Handle Socket
Circlip External 7mm
Table 11: Wiring Loom Handle Socket Kit
3.1 - Opening the Detector
65
F3 COMPACT Service Manual
Body. Once