Table of Contents
Advertisement
Check the print condition for which
nozzle recovery cannot be performed
Depending on the nozzle registered, there is the mode not
reflected by "RECOVERY".
Check the unrecoverable print conditions with the check
function.
• If there are many registered nozzles, it takes time
to display the check result.
Press the
1
Press
2
and press the
• Maintenance MENU appears.
Press
3
Recovery", and press the
Press
4
press the
• The mode for which nozzle recovery is invalid is
displayed.
• If there is no mode for which nozzle recovery is
invalid, "NONE" is displayed.
Press the
5
to end the setting.
Clear the set value
Press the
1
Press
2
and press the
• Maintenance MENU appears.
Press
3
Recovery", and press the
Press
4
press the
Press
and
5
(<<) to selet the Nozzle line that need clear,
and press the
• A clearconfirmation message appears.
Press the
6
Press the
7
to end the setting.
(MENU) in Local.
to select "Maintenance",
key.
to select "Nozzle
key.
to select "CHECK", and
key.
key several times
(MENU) in Local.
to select "Maintenance",
key.
to select "Nozzle
key.
to select "CLEAR", and
key.
(>>)
key.
key.
key several times
Automatic Mainte-
nance Function
To use this machine comfortably, you can set various
maintenances to be performed automatically.
Here, set performing intervals of various automatic
maintenances.
You can prevent troubles such as ink clogging by
performing automatic maintenance periodically (automatic
maintenance function).
For the Auto Maint. functions, the following items can be
set:
• When you perform maintenance manually, after
manual maintenance is completed and when time
set with the automatic maintenance function has
passed, maintenance starts automatically.
Function name
Refresh
Sets the refresh level.
Cleaning
Sets the head cleaning level.
• If an ink tank error occurs, the operation set by the
Automatic Maintenance function is not performed.
Release the error. (
• During the execution of automatic maintenance,
ink flows into the waste ink tank. Check the
amount of ink in the waste ink tank every day, and
discard the ink if necessary. (
Setting the Refreshing level
For nozzle clogging prevention, set the amount of some
ink to be discharged from the nozzle.
Press the
1
Press
to select "Maintenance",
2
and press the
• Maintenance MENU appears.
Press
to select "Auto Maint.",
3
and press the
Press the
4
• "Refresh" will be selected.
Press
to set the refresh level, and
5
press the
• Set value : OFF/Lv.1/Lv.2/Lv.3
Press the
6
end the setting.
Chapter 4 Maintenance
Descriptions
P.5-11)
P.4-16)
(MENU) in Local.
key.
key.
key.
key.
key several times to
4
2
4-15
Advertisement
Table of Contents
