Setting Interval Wiping; Changing The Time When A Warning About Wiper Cleaning Is Issued; Changing The Time When A Warning About Wip- Er Cleaning Is Issued - MIMAKI UJF-7151 plus Operation Manual

Chapter 4 Maintenance

Setting Interval wiping

When a set time has elapsed, the machine automatically
wipes the nozzle surfaces of the head to remove any ink
droplets attached to the surfaces.
In case that deflection, nozzle missing, or symptom which
ink droplets fall down occurred, set the interval between
each operation shorter.
Press the
1
key in LOCAL.
• MAINTENANCE MENU will be displayed.
Press
2
, and press the
Press
3
• Set Value : 1 to 255 scan, OFF
• When [OFF] is set, periodical wiping is not
executed.
Press the
4
Press the
5
end the setting.
• The color tone may change, depending on the
timing when periodic wiping is performed. Check
in advance that the color tone is not affected.
4-14
(4 times)
(MENU)
to select "Interval Wiping"
key.
to set intervals.
key.
key several times to
Changing the Time When a Warning
about Wiper Cleaning Is Issued
Wiper levels can be set so that a warning about wiper
replacement is issued earlier than the standard according
to the operating environment.
Displays the wiper cleaning warning
when wiping has been performed the
10/10
standard number of times. (Initial
value)
Displays the wiper cleaning warning
when wiping has been performed
9/10
nine tenths of the standard number of
times.
Displays the wiper cleaning warning
when wiping has been performed
8/10
eight tenths of the standard number of
times.
Displays the wiper cleaning warning
when wiping has been performed one
1/10
tenth of the standard number of times.
Press the
1
key in LOCAL.
• MAINTENANCE MENU will be displayed.
Press to select "WIPE LEVEL",
2
and press the
Press to set a wiper level, and
3
press the
• Set value : 1/10 to 10/10
Press the
4
Press the
5
end the setting.
(4 times)
(MENU)
key.
key.
key.
key several times to