Screens And Buttons Displayed - Fuji Xerox DocuPrint CM505 da User Manual

Screens and Buttons Displayed

You can register or change the services and buttons displayed on the touch screen.
You can customize the following screens:
Note • The following screens and buttons may have been changed by the system administrator.
Setting the Initial Screen
You can set the screen displayed after switching the power on or exiting the Energy
Saver mode.
Setting the Screen Displayed after Auto Clear
You can select [Last Selection Screen] or [Services Home] for the screen to be
displayed after Auto Clear.
Assigning Services to the Custom Buttons
You can assign services to the Custom buttons on the control pane.
By assigning frequently-used services to the Custom buttons, you can switch to the
services without returning to the [Services Home] screen.
Note • By default, "Copy" is assigned to the <Copy> button, and "Review" is assigned to the
Customizing the [Services Home] Screen
You can customize the layout of services and buttons on the [Services Home] screen
that is displayed when you press the <Services Home> button on the control panel.
For information on how to customize the [Services Home] screen, refer to "1 Before Using the Machine"
> "Customizing the Control Panel" > "Customizing the Control Panel" > "Customizing the [Services
Home] Screen" in the Administrator Guide.
Use the machine according to the changes being made.
<Review> button. No service is assigned to the <(Not In Use)> button.
Control Panel
2
53