Mitsubishi 3000GT 1991 Service Manual page 542

AUTOMATIC TRANSAXLE
Inhibitor switch
new one.
case from the inside.
hole.
temporarily secure the valve body. Then, install the oil
temperature sensor and holder and tighten bolts to speci-
fication.
Bolt A = 18 mm (.71 in.)
Bolt B = 25 mm (.98 in.)
Bolt C = 40 mm (1.57 in.)
Caution
Secure the solenoid valve and oil temperature sensor
harnesses as shown.
(71 )Install the speedometer gear assembly.
TSB Revision