Mitsubishi 3000GT 1991 Service Manual page 322

INTAKE AND EXHAUST
Air Intake hose B
Air hose
TSB Revision
SERVICE POINT OF REMOVAL
13. REMOVAL OF ENGINE OIL COOLER
Disconnect the hose from the engine oil cooler and remove
the engine oil cooler only.
INSPECTION
Check the intercooler fins for bending, damage, or foreign
l
matter.
Check the intercooler hoses for cracking, damage, or wear.
l
SERVICE POINTS OF INSTALLATION
21. INSTALLATION OF AIR INTAKE HOSE C / 20. AIR
INTAKE HOSE B / 19. AIR INTAKE HOSE A
Engaging the notch with the n mark at points indicated by
the arrows, insert air intake hoses B and C until seated.
Insert the turbocharger end of air intake hoses B and C
completely.
15. INSTALLATION OF INTERCOOLER LEFT / 12. AIR HOSE
F / 9. AIR HOSE E / 8. AIR HOSE B / 5. AIR HOSE G
Aligning the marks at the points indicated by the arrows,
insert securely into the stepped portion of the pipe or until
seated.
Caution
Be careful not to allow any foreign matter to get into
the hoses, pipes, or the intercooler itself.
4. INSTALLATION OF INTERCOOLER RIGHT / 2. AIR HOSE
D / 1. AIR HOSE C
Aligning the marks at the points indicated by arrows, insert
securely into the stepped portion of the pipe.
Caution
Be careful not to allow any foreign matter to get into
the hoses, pipes, or the intercooler itself.