LSD CASE ASSEMBLY
DISASSEMBLY AND REASSEMBLY
Disassembly steps
1. Screw
l
+ 2. Differential case A
4. Viscous unit
7. Differential pinion shaft
8. Differential side gear
l *
9. Thrust washer (R.H.)
l
Feeler gauge
Differential side Thrust washer
(right)
gear
REAR AXLE <AWD>
INSPECTION BEFORE DISASSEMBLY
1. CHECKING THE DIFFERENTIAL GEAR BACKLASH
(1) Secure the differential case assembly in a vise so that
(2) Insert a 0.03 mm LOO12 in.) feeler gauge at two places
llFO037
Case
Assembly
the differential side gear (right) is facing upward.
Caution
When securing the vise, be sure not to hold the
differential case assembly too tightly.
(diagonally) between differential case I3 and the thrust
washer (right).
Caution
Do not insert a feeler gauge in the oil groove of
differential case B.
27-39
1 lFOO33