Mitsubishi 3000GT 1991 Service Manual page 809

SERVICE BRAKES - Hvdraulic Unit (ABS)
SERVICE POINTS OF REMOVAL
1. REMOVAL OF BRAKE TUBES
Pull up the relay box with harness attached and inserting a
hand under the relay box, remove the brake tubes using the
flare nut wrench.
4. REMOVAL OF HYDRAULIC UNIT (HU)
Remove the hydraulic unit together with the bracket from
the wheel house.
Caution
1. The HU is heavy. Use care when removing it.
2. The HU cannot be disassembled. Never loosen its
3. Do not drop or shock the HU.
4. Do not turn the HU upside down or lay it on its side.
SERVICE POINTS OF INSTALLATION
6. CONNECTION OF GROUNDING WIRE
Connect the grounding wire at the point shown in the
illustration.
1. INSTALLATION OF BRAKE TUBE
Pull up the relay box with harness attached and inserting a
hand under the relay box, install the brake tubes using flare
nut wrench.
Connect the tube and hose to the hydraulic unit correctly.
(Refer to P.35-73.)
nuts or bolts.