Mitsubishi 3000GT 1991 Service Manual page 853

STEERING
Back-up washer
Vinyl tape
Rack bushing
Seal rings
MB99131 7
Tapered
side
(3) Apply specified fluid on special tool.
Specified fluid: MITSUBISHI PLUS ATFIAutomatic
(4) Match oil seal center with rack to prevent retainer
spring from slipping and slowly insert rack from power
cylinder side.
1360147
25. INSTALLATION OF RACK BUSHING
Wrap the rack end with vinyl tape, apply a coating of the
specified fluid, and then install the
stopper.
Specified fluid: MITSUBISHI PLUS ATF/Automatic
Caution
Do not allow oil seal retainer spring to slip out.
23. INSTALLATION OF CIRCLIP
Insert circlip to rack stopper hole through cylinder hole. Turn
rack stopper clockwise and insert circlip firmly.
Caution
Insert circlip to rack stopper hole while turning rack
stopper clockwise.
20. INSTALLATION OF SEAL RINGS / 19. PINION AND
VALVE ASSEMBLY
groove. Apply specified fluid.
Specified fluid: MITSUBISHI PLUS ATF/Automatic
NOTE
Because the seal rings expand at the time of installa-
tion, use the special tool to compress the seal rings so
that they are well seated.
TSB
Revision
transmission fluid "DEXRON" or
"DEXRON II"
rack
bushing and rack
transmission fluid "DEXRON" or
"DEXRON II"
transmission fluid "DEXRON" or
"DEXRON II"
I