INTAKE AND EXHAUST - Turbocharger (Front)
I -
Matchmark
l
Hose end paint
Matchmark
l
Hose end paint
Pipe end protrusion
19. INSTALLATION OF OXYGEN SENSOR
Use the special tool to install the oxygen sensor.
7. INSTALLATION OF AIR HOSE E / 5. AIR HOSE B
Aligning the marks at the points indicated by the arrows,
insert securely into the stepped portion of the pipe or until
seated.
Caution
Be careful not to allow any foreign matter to get
the hoses or pipes.
3. INSTALLATION OF AIR HOSE D / 1. AIR HOSE C
Aligning the marks at the points indicated by the arrows,
insert securely into the stepped portion of the pipe.
Caution
Be careful not to allow any foreign matter to get into
the hoses or pipes.
2. INSTALLATION OF AIR INTAKE HOSE B
Engaging the notches with LL marks at the points indicated
by the arrows, insert until seated.
Insert the turbocharger end of air intake hose B completely.
into