Mitsubishi 3000GT 1991 Service Manual page 285

CRUISE CONTROL SYSTEM
Adjusting nut C
Link B lever
is blocked by the stopper, turn down adjusting nut C in
the direction that the free travel of the inner cable is
reduced, and back off adjusting nut C the specified
number of turns just before intermediate link C begins
to move.
Amount adjusting nut C is to be backed off:
travel of the inner cable of the throttle cable is reduced.
At the position where the lever of intermediate link B is
brought into contact with intermediate. link C, back off
adjusting nut B the specified number of turns.
Amount adjusting nut B is to be backed off:
About one turn [inner cable free travel 1 to 2 mm
travel of the inner cable of the cruise control cable is
reduced. At the position where the lever of intermedi-
ate link A is brought into contact with intermediate link
B, back off adjusting nut A the specified number of
turns.
Amount adjusting nut A is to be backed off:
About one turn [inner cable free travel 1 to 2 mm
SAS is in contact with the stopper of the throttle lever.
,
CRUISE CONTROL SYSTEM INSPECTION
CRUISE CONTROL MAIN SWITCH CHECK
light within the combination meter illuminates when the
main switch is switched ON.
TSB Revision
About l/2 turn [inner cable free travel
0 - 1 mm (0 - .04 in.)]
About two turns [inner cable free
travel 2 to 3 mm (.08 to .12 in.)]